[PATCH for v4.9 LTS 73/87] scsi: qla2xxx: Get mutex lock before checking optrom_state

[Levin, Alexander (Sasha Levin)]

From: "Milan P. Gandhi" <***@redhat.com>

[ Upstream commit c7702b8c22712a06080e10f1d2dee1a133ec8809 ]

There is a race condition with qla2xxx optrom functions where one thread
might modify optrom buffer, optrom_state while other thread is still
reading from it.

In couple of crashes, it was found that we had successfully passed the
following 'if' check where we confirm optrom_state to be
QLA_SREADING. But by the time we acquired mutex lock to proceed with
memory_read_from_buffer function, some other thread/process had already
modified that option rom buffer and optrom_state from QLA_SREADING to
QLA_SWAITING. Then we got ha->optrom_buffer 0x0 and crashed the system:

if (ha->optrom_state != QLA_SREADING)
return 0;

mutex_lock(&ha->optrom_mutex);
rval = memory_read_from_buffer(buf, count, &off, ha->optrom_buffer,
ha->optrom_region_size);
mutex_unlock(&ha->optrom_mutex);

With current optrom function we get following crash due to a race
condition:

[ 1479.466679] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 1479.466707] IP: [<ffffffff81326756>] memcpy+0x6/0x110
[...]
[ 1479.473673] Call Trace:
[ 1479.474296] [<ffffffff81225cbc>] ? memory_read_from_buffer+0x3c/0x60
[ 1479.474941] [<ffffffffa01574dc>] qla2x00_sysfs_read_optrom+0x9c/0xc0 [qla2xxx]
[ 1479.475571] [<ffffffff8127e76b>] read+0xdb/0x1f0
[ 1479.476206] [<ffffffff811fdf9e>] vfs_read+0x9e/0x170
[ 1479.476839] [<ffffffff811feb6f>] SyS_read+0x7f/0xe0
[ 1479.477466] [<ffffffff816964c9>] system_call_fastpath+0x16/0x1b

Below patch modifies qla2x00_sysfs_read_optrom,
qla2x00_sysfs_write_optrom functions to get the mutex_lock before
checking ha->optrom_state to avoid similar crashes.

The patch was applied and tested and same crashes were no longer
observed again.

Tested-by: Milan P. Gandhi <***@redhat.com>
Signed-off-by: Milan P. Gandhi <***@redhat.com>
Reviewed-by: Laurence Oberman <***@redhat.com>
Acked-by: Himanshu Madhani <***@cavium.com>
Signed-off-by: Martin K. Petersen <***@oracle.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/scsi/qla2xxx/qla_attr.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index ad33238cef17..8c4641b518b5 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -243,12 +243,15 @@ qla2x00_sysfs_read_optrom(struct file *filp, struct kobject *kobj,
struct qla_hw_data *ha = vha->hw;
ssize_t rval = 0;

+ mutex_lock(&ha->optrom_mutex);
+
if (ha->optrom_state != QLA_SREADING)
- return 0;
+ goto out;

- mutex_lock(&ha->optrom_mutex);
rval = memory_read_from_buffer(buf, count, &off, ha->optrom_buffer,
ha->optrom_region_size);
+
+out:
mutex_unlock(&ha->optrom_mutex);

return rval;
@@ -263,14 +266,19 @@ qla2x00_sysfs_write_optrom(struct file *filp, struct kobject *kobj,
struct device, kobj)));
struct qla_hw_data *ha = vha->hw;

- if (ha->optrom_state != QLA_SWRITING)
+ mutex_lock(&ha->optrom_mutex);
+
+ if (ha->optrom_state != QLA_SWRITING) {
+ mutex_unlock(&ha->optrom_mutex);
return -EINVAL;
- if (off > ha->optrom_region_size)
+ }
+ if (off > ha->optrom_region_size) {
+ mutex_unlock(&ha->optrom_mutex);
return -ERANGE;
+ }
if (off + count > ha->optrom_region_size)
count = ha->optrom_region_size - off;

- mutex_lock(&ha->optrom_mutex);
memcpy(&ha->optrom_buffer[off], buf, count);
mutex_unlock(&ha->optrom_mutex);

[Levin, Alexander (Sasha Levin)]

From: Ard Biesheuvel <***@linaro.org>

[ Upstream commit f073bdc51771f5a5c7a8d1191bfc3ae371d44de7 ]

The VM_BUG_ON() check in move_freepages() checks whether the node id of
a page matches the node id of its zone. However, it does this before
having checked whether the struct page pointer refers to a valid struct
page to begin with. This is guaranteed in most cases, but may not be
the case if CONFIG_HOLES_IN_ZONE=y.

So reorder the VM_BUG_ON() with the pfn_valid_within() check.

Link: http://lkml.kernel.org/r/1481706707-6211-2-git-send-email-***@linaro.org
Signed-off-by: Ard Biesheuvel <***@linaro.org>
Acked-by: Will Deacon <***@arm.com>
Cc: Catalin Marinas <***@arm.com>
Cc: Hanjun Guo <***@linaro.org>
Cc: Yisheng Xie <***@huawei.com>
Cc: Robert Richter <***@cavium.com>
Cc: James Morse <***@arm.com>
Signed-off-by: Andrew Morton <***@linux-foundation.org>
Signed-off-by: Linus Torvalds <***@linux-foundation.org>
Signed-off-by: Sasha Levin <***@verizon.com>
---
mm/page_alloc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 56df8c24689d..85881bf01776 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1875,14 +1875,14 @@ int move_freepages(struct zone *zone,
#endif

for (page = start_page; page <= end_page;) {
- /* Make sure we are not inadvertently changing nodes */
- VM_BUG_ON_PAGE(page_to_nid(page) != zone_to_nid(zone), page);
-
if (!pfn_valid_within(page_to_pfn(page))) {
page++;
continue;
}

+ /* Make sure we are not inadvertently changing nodes */
+ VM_BUG_ON_PAGE(page_to_nid(page) != zone_to_nid(zone), page);
+
if (!PageBuddy(page)) {
page++;
continue;

[Levin, Alexander (Sasha Levin)]

From: Maninder Singh <***@samsung.com>

[ Upstream commit 5066d5296ff2db20625e5f46e7338872c90c649f ]

Issue caught with static analysis tool:
"Dangerous usage of 'name' (strncpy doesn't always 0-terminate it)"

Use strlcpy _includes_ the NUL terminator, and strlcat() which ensures
that it won't overflow the buffer.

Reported-by: Maninder Singh <***@samsung.com>
Signed-off-by: Vaneet Narang <***@samsung.com>
CC: Russell King <***@armlinux.org.uk>
Signed-off-by: Tony Lindgren <***@atomide.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
arch/arm/mach-omap2/omap_hwmod.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 1052b29697b8..b5c1714ebfdd 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -790,14 +790,14 @@ static int _init_main_clk(struct omap_hwmod *oh)
int ret = 0;
char name[MOD_CLK_MAX_NAME_LEN];
struct clk *clk;
+ static const char modck[] = "_mod_ck";

- /* +7 magic comes from '_mod_ck' suffix */
- if (strlen(oh->name) + 7 > MOD_CLK_MAX_NAME_LEN)
+ if (strlen(oh->name) >= MOD_CLK_MAX_NAME_LEN - strlen(modck))
pr_warn("%s: warning: cropping name for %s\n", __func__,
oh->name);

- strncpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - 7);
- strcat(name, "_mod_ck");
+ strlcpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - strlen(modck));
+ strlcat(name, modck, MOD_CLK_MAX_NAME_LEN);

clk = clk_get(NULL, name);
if (!IS_ERR(clk)) {

[Levin, Alexander (Sasha Levin)]

From: Chun-Hao Lin <***@realtek.com>

[ Upstream commit 610c908773d30907c950ca3b2ee8ac4b2813537b ]

This chip is the same as RTL8168, but its device id is 0x8161.

Signed-off-by: Chun-Hao Lin <***@realtek.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/net/ethernet/realtek/r8169.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index bf000d819a21..2c4350a1c629 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -326,6 +326,7 @@ enum cfg_version {
static const struct pci_device_id rtl8169_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8129), 0, 0, RTL_CFG_0 },
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8136), 0, 0, RTL_CFG_2 },
+ { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8161), 0, 0, RTL_CFG_1 },
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8167), 0, 0, RTL_CFG_0 },
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8168), 0, 0, RTL_CFG_1 },
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169), 0, 0, RTL_CFG_0 },

[Levin, Alexander (Sasha Levin)]

From: Christophe JAILLET <***@wanadoo.fr>

[ Upstream commit 9620ca90115d4bd700f05862d3b210a266a66efe ]

We should go to 'err_put_master' here instead of returning directly.
Otherwise a call to 'spi_master_put' is missing.

Signed-off-by: Christophe JAILLET <***@wanadoo.fr>
Acked-by: Lars-Peter Clausen <***@metafoo.de>
Signed-off-by: Mark Brown <***@kernel.org>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/spi/spi-axi-spi-engine.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-axi-spi-engine.c b/drivers/spi/spi-axi-spi-engine.c
index 2b1456e5e221..c1eafbd7610a 100644
--- a/drivers/spi/spi-axi-spi-engine.c
+++ b/drivers/spi/spi-axi-spi-engine.c
@@ -494,7 +494,8 @@ static int spi_engine_probe(struct platform_device *pdev)
SPI_ENGINE_VERSION_MAJOR(version),
SPI_ENGINE_VERSION_MINOR(version),
SPI_ENGINE_VERSION_PATCH(version));
- return -ENODEV;
+ ret = -ENODEV;
+ goto err_put_master;
}

spi_engine->clk = devm_clk_get(&pdev->dev, "s_axi_aclk");

[Levin, Alexander (Sasha Levin)]

From: Bard Liao <***@realtek.com>

[ Upstream commit 02c5c03283c52157d336abf5e44ffcda10579fbf ]

The i2s clock pre-divider 1 is used for both i2s1 and sysclk.
The i2s1 is usually used for the main i2s and the pre-divider
will be set in hw_params function.

However, if i2s2 is used, the pre-divider is not set in the hw_params
function and the default value of i2s clock pre-divider 1 is too high
for sysclk and DMIC usage. Fix by overriding default divider value to 2.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95681
Tested-by: Pierre-Louis Bossart <pierre-***@linux.intel.com>
Signed-off-by: Bard Liao <***@realtek.com>
Signed-off-by: Mark Brown <***@kernel.org>
Signed-off-by: Sasha Levin <***@verizon.com>
---
sound/soc/codecs/rt5645.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c
index 10c2a564a715..1ac96ef9ee20 100644
--- a/sound/soc/codecs/rt5645.c
+++ b/sound/soc/codecs/rt5645.c
@@ -3833,6 +3833,9 @@ static int rt5645_i2c_probe(struct i2c_client *i2c,
}
}

+ regmap_update_bits(rt5645->regmap, RT5645_ADDA_CLK1,
+ RT5645_I2S_PD1_MASK, RT5645_I2S_PD1_2);
+
if (rt5645->pdata.jd_invert) {
regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2,
RT5645_JD_1_1_MASK, RT5645_JD_1_1_INV);

[Levin, Alexander (Sasha Levin)]

From: Or Gerlitz <***@mellanox.com>

[ Upstream commit 9da34cd34e85aacc55af8774b81b1f23e86014f9 ]

Under the switchdev/offloads mode, packets that don't match any
e-switch steering rule are sent towards the e-switch management
port. We use a NIC HW steering rule set per vport (uplink and VFs)
to make them be received into the host OS through the respective
vport representor netdevice.

Currnetly such missed RoCE packets will not get to this NIC steering
rule, and hence VF RoCE will not work over the slow path of the offloads
mode. This is b/c these packets will be matched by a steering rule added
by the firmware that serves RoCE traffic set on the PF NIC vport which
is also the e-switch management port under SRIOV.

Disabling RoCE on the e-switch management vport when we are in the offloads
mode, will signal to the firmware to remove their RoCE rule, and then the
missed RoCE packets will be matched by the representor NIC steering rule
as any other missed packets.

To achieve that, we disable RoCE on the PF vport. We do that by removing
(hot-unplugging) the IB device instance associated with the PF. This is
also required by our current model where the PF serves as the uplink
representor and hence only SW switching (TC, bridge, OVS) applications
and slow path vport mlx5e net-device should be running over that vport.

Fixes: c930a3ad7453 ('net/mlx5e: Add devlink based SRIOV mode changes')
Signed-off-by: Or Gerlitz <***@mellanox.com>
Reviewed-by: Hadar Hen Zion <***@mellanox.com>
Signed-off-by: Saeed Mahameed <***@mellanox.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index b08b9e2c6a76..6ffd5d2a70aa 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -672,6 +672,12 @@ int esw_offloads_init(struct mlx5_eswitch *esw, int nvports)
if (err)
goto err_reps;
}
+
+ /* disable PF RoCE so missed packets don't go through RoCE steering */
+ mlx5_dev_list_lock();
+ mlx5_remove_dev_by_protocol(esw->dev, MLX5_INTERFACE_PROTOCOL_IB);
+ mlx5_dev_list_unlock();
+
return 0;

err_reps:
@@ -695,6 +701,11 @@ static int esw_offloads_stop(struct mlx5_eswitch *esw)
{
int err, err1, num_vfs = esw->dev->priv.sriov.num_vfs;

+ /* enable back PF RoCE */
+ mlx5_dev_list_lock();
+ mlx5_add_dev_by_protocol(esw->dev, MLX5_INTERFACE_PROTOCOL_IB);
+ mlx5_dev_list_unlock();
+
mlx5_eswitch_disable_sriov(esw);
err = mlx5_eswitch_enable_sriov(esw, num_vfs, SRIOV_LEGACY);
if (err) {

[Levin, Alexander (Sasha Levin)]

From: Grygorii Strashko <***@ti.com>

[ Upstream commit 12a7f17fac5b370bec87259e4c718faf563ce900 ]

Now races can happen between interrupt handler execution and PM runtime in
error handling code path in probe and in dwc3_omap_remove() which will lead
to system crash:

in probe:
...
err1:
pm_runtime_put_sync(dev);
^^ PM runtime can race with IRQ handler when deferred probing happening
due to extcon
pm_runtime_disable(dev);

return ret;

in dwc3_omap_remove:
...
dwc3_omap_disable_irqs(omap);
^^ IRQs are disabled in HW, but handler may still run
of_platform_depopulate(omap->dev);
pm_runtime_put_sync(&pdev->dev);
^^ PM runtime can race with IRQ handler
pm_runtime_disable(&pdev->dev);

return 0;

So, OMAP DWC3 IRQ need to be disabled before calling
pm_runtime_put() in probe and in dwc3_omap_remove().

Acked-by: Tony Lindgren <***@atomide.com>
Signed-off-by: Grygorii Strashko <***@ti.com>
Signed-off-by: Felipe Balbi <***@linux.intel.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/usb/dwc3/dwc3-omap.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 5dd1832564c7..35b63518baf6 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/platform_data/dwc3-omap.h>
@@ -511,7 +512,7 @@ static int dwc3_omap_probe(struct platform_device *pdev)

/* check the DMA Status */
reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
-
+ irq_set_status_flags(omap->irq, IRQ_NOAUTOEN);
ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt,
dwc3_omap_interrupt_thread, IRQF_SHARED,
"dwc3-omap", omap);
@@ -532,7 +533,7 @@ static int dwc3_omap_probe(struct platform_device *pdev)
}

dwc3_omap_enable_irqs(omap);
-
+ enable_irq(omap->irq);
return 0;

err2:
@@ -553,6 +554,7 @@ static int dwc3_omap_remove(struct platform_device *pdev)
extcon_unregister_notifier(omap->edev, EXTCON_USB, &omap->vbus_nb);
extcon_unregister_notifier(omap->edev, EXTCON_USB_HOST, &omap->id_nb);
dwc3_omap_disable_irqs(omap);
+ disable_irq(omap->irq);
of_platform_depopulate(omap->dev);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);

[Levin, Alexander (Sasha Levin)]

From: Pavel Tikhomirov <***@virtuozzo.com>

[ Upstream commit b007f09072ca8afa118ade333e717ba443e8d807 ]

cat /proc/sys/net/ipv4/tcp_notsent_lowat

-1

echo 4294967295 > /proc/sys/net/ipv4/tcp_notsent_lowat

-bash: echo: write error: Invalid argument

echo -2147483648 > /proc/sys/net/ipv4/tcp_notsent_lowat
cat /proc/sys/net/ipv4/tcp_notsent_lowat

-2147483648

but in documentation we have "tcp_notsent_lowat - UNSIGNED INTEGER"

v2: simplify to just proc_douintvec
Signed-off-by: Pavel Tikhomirov <***@virtuozzo.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Sasha Levin <***@verizon.com>
---
net/ipv4/sysctl_net_ipv4.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c
index 80bc36b25de2..566cfc50f7cf 100644
--- a/net/ipv4/sysctl_net_ipv4.c
+++ b/net/ipv4/sysctl_net_ipv4.c
@@ -958,7 +958,7 @@ static struct ctl_table ipv4_net_table[] = {
.data = &init_net.ipv4.sysctl_tcp_notsent_lowat,
.maxlen = sizeof(unsigned int),
.mode = 0644,
- .proc_handler = proc_dointvec,
+ .proc_handler = proc_douintvec,
},
#ifdef CONFIG_IP_ROUTE_MULTIPATH
{

[Levin, Alexander (Sasha Levin)]

From: Sergei Shtylyov <***@cogentembedded.com>

[ Upstream commit 978d3639fd13d987950e4ce85c8737ae92154b2c ]

As the SH77{34|63} manuals are freely available, I've checked the EESIPR
values written against the manuals, and they appeared to set the reserved
bits 11-15 (which should be 0 on write). Fix those EESIPR values.

Fixes: 380af9e390ec ("net: sh_eth: CPU dependency code collect to "struct sh_eth_cpu_data"")
Fixes: f5d12767c8fd ("sh_eth: get SH77{34|63} support out of #ifdef")
Signed-off-by: Sergei Shtylyov <***@cogentembedded.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/net/ethernet/renesas/sh_eth.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 12be259394c6..be2520e977d7 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -802,7 +802,7 @@ static struct sh_eth_cpu_data sh7734_data = {

.ecsr_value = ECSR_ICD | ECSR_MPD,
.ecsipr_value = ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP,
- .eesipr_value = DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff,
+ .eesipr_value = DMAC_M_RFRMER | DMAC_M_ECI | 0x003f07ff,

.tx_check = EESR_TC1 | EESR_FTC,
.eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT |
@@ -832,7 +832,7 @@ static struct sh_eth_cpu_data sh7763_data = {

.ecsr_value = ECSR_ICD | ECSR_MPD,
.ecsipr_value = ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP,
- .eesipr_value = DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff,
+ .eesipr_value = DMAC_M_RFRMER | DMAC_M_ECI | 0x003f07ff,

.tx_check = EESR_TC1 | EESR_FTC,
.eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT |

[Levin, Alexander (Sasha Levin)]

From: Caleb Crome <***@crome.org>

[ Upstream commit 4ee437fbf626b5ad756889d8bc0fcead3d66dde7 ]

The fsl_ssi fifo watermark is by default set to 2 free spaces (i.e.
activate DMA on FIFO when only 2 spaces are left.) This means the
DMA must service the fifo within 2 audio samples, which is just not
enough time for many use cases with high data rate. In many
configurations the audio channel slips (causing l/r swap in stereo
configurations, or channel slipping in multi-channel configurations).

This patch gives more breathing room and allows the SSI to operate
reliably by changing the fifio refill watermark to 8.

There is no change in behavior for older chips (with an 8-deep fifo).
Only the newer chips with a 15-deep fifo get the new behavior. I
suspect a new fifo depth setting could be optimized on the older
chips too, but I have not tested.

Signed-off-by: Caleb Crome <***@crome.org>
Reviewed-by: Fabio Estevam <***@nxp.com>
Signed-off-by: Mark Brown <***@kernel.org>
Signed-off-by: Sasha Levin <***@verizon.com>
---
sound/soc/fsl/fsl_ssi.c | 74 +++++++++++++++++++++++++++++++++++--------------
1 file changed, 53 insertions(+), 21 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 50349437d961..fde08660b63b 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -224,6 +224,12 @@ struct fsl_ssi_soc_data {
* @dbg_stats: Debugging statistics
*
* @soc: SoC specific data
+ *
+ * @fifo_watermark: the FIFO watermark setting. Notifies DMA when
+ * there are @fifo_watermark or fewer words in TX fifo or
+ * @fifo_watermark or more empty words in RX fifo.
+ * @dma_maxburst: max number of words to transfer in one go. So far,
+ * this is always the same as fifo_watermark.
*/
struct fsl_ssi_private {
struct regmap *regs;
@@ -263,6 +269,9 @@ struct fsl_ssi_private {

const struct fsl_ssi_soc_data *soc;
struct device *dev;
+
+ u32 fifo_watermark;
+ u32 dma_maxburst;
};

/*
@@ -1051,21 +1060,7 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev,
regmap_write(regs, CCSR_SSI_SRCR, srcr);
regmap_write(regs, CCSR_SSI_SCR, scr);

- /*
- * Set the watermark for transmit FIFI 0 and receive FIFO 0. We don't
- * use FIFO 1. We program the transmit water to signal a DMA transfer
- * if there are only two (or fewer) elements left in the FIFO. Two
- * elements equals one frame (left channel, right channel). This value,
- * however, depends on the depth of the transmit buffer.
- *
- * We set the watermark on the same level as the DMA burstsize. For
- * fiq it is probably better to use the biggest possible watermark
- * size.
- */
- if (ssi_private->use_dma)
- wm = ssi_private->fifo_depth - 2;
- else
- wm = ssi_private->fifo_depth;
+ wm = ssi_private->fifo_watermark;

regmap_write(regs, CCSR_SSI_SFCSR,
CCSR_SSI_SFCSR_TFWM0(wm) | CCSR_SSI_SFCSR_RFWM0(wm) |
@@ -1373,12 +1368,8 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev,
dev_dbg(&pdev->dev, "could not get baud clock: %ld\n",
PTR_ERR(ssi_private->baudclk));

- /*
- * We have burstsize be "fifo_depth - 2" to match the SSI
- * watermark setting in fsl_ssi_startup().
- */
- ssi_private->dma_params_tx.maxburst = ssi_private->fifo_depth - 2;
- ssi_private->dma_params_rx.maxburst = ssi_private->fifo_depth - 2;
+ ssi_private->dma_params_tx.maxburst = ssi_private->dma_maxburst;
+ ssi_private->dma_params_rx.maxburst = ssi_private->dma_maxburst;
ssi_private->dma_params_tx.addr = ssi_private->ssi_phys + CCSR_SSI_STX0;
ssi_private->dma_params_rx.addr = ssi_private->ssi_phys + CCSR_SSI_SRX0;

@@ -1543,6 +1534,47 @@ static int fsl_ssi_probe(struct platform_device *pdev)
/* Older 8610 DTs didn't have the fifo-depth property */
ssi_private->fifo_depth = 8;

+ /*
+ * Set the watermark for transmit FIFO 0 and receive FIFO 0. We don't
+ * use FIFO 1 but set the watermark appropriately nontheless.
+ * We program the transmit water to signal a DMA transfer
+ * if there are N elements left in the FIFO. For chips with 15-deep
+ * FIFOs, set watermark to 8. This allows the SSI to operate at a
+ * high data rate without channel slipping. Behavior is unchanged
+ * for the older chips with a fifo depth of only 8. A value of 4
+ * might be appropriate for the older chips, but is left at
+ * fifo_depth-2 until sombody has a chance to test.
+ *
+ * We set the watermark on the same level as the DMA burstsize. For
+ * fiq it is probably better to use the biggest possible watermark
+ * size.
+ */
+ switch (ssi_private->fifo_depth) {
+ case 15:
+ /*
+ * 2 samples is not enough when running at high data
+ * rates (like 48kHz @ 16 bits/channel, 16 channels)
+ * 8 seems to split things evenly and leave enough time
+ * for the DMA to fill the FIFO before it's over/under
+ * run.
+ */
+ ssi_private->fifo_watermark = 8;
+ ssi_private->dma_maxburst = 8;
+ break;
+ case 8:
+ default:
+ /*
+ * maintain old behavior for older chips.
+ * Keeping it the same because I don't have an older
+ * board to test with.
+ * I suspect this could be changed to be something to
+ * leave some more space in the fifo.
+ */
+ ssi_private->fifo_watermark = ssi_private->fifo_depth - 2;
+ ssi_private->dma_maxburst = ssi_private->fifo_depth - 2;
+ break;
+ }
+
dev_set_drvdata(&pdev->dev, ssi_private);

if (ssi_private->soc->imx) {

[Levin, Alexander (Sasha Levin)]

From: Michael Chan <***@broadcom.com>

[ Upstream commit f5992b72ebe0dde488fa8f706b887194020c66fc ]

The driver's ndo_get_stats64() method is not always called under RTNL.
So it can race with driver close or ethtool reconfigurations. Fix the
race condition by taking tp->lock spinlock in tg3_free_consistent()
when freeing the tp->hw_stats memory block. tg3_get_stats64() is
already taking tp->lock.

Reported-by: Wang Yufen <***@huawei.com>
Signed-off-by: Michael Chan <***@broadcom.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/net/ethernet/broadcom/tg3.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index a927a730da10..edae2dcc4927 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -8720,11 +8720,14 @@ static void tg3_free_consistent(struct tg3 *tp)
tg3_mem_rx_release(tp);
tg3_mem_tx_release(tp);

+ /* Protect tg3_get_stats64() from reading freed tp->hw_stats. */
+ tg3_full_lock(tp, 0);
if (tp->hw_stats) {
dma_free_coherent(&tp->pdev->dev, sizeof(struct tg3_hw_stats),
tp->hw_stats, tp->stats_mapping);
tp->hw_stats = NULL;
}
+ tg3_full_unlock(tp);
}

/*

[Levin, Alexander (Sasha Levin)]

From: Grygorii Strashko <***@ti.com>

[ Upstream commit 5ca7d1ca77dc23934504b95a96d2660d345f83c2 ]

For proper IRQ generation by DP83867 phy the INT/PWDN pin has to be
programmed as an interrupt output instead of a Powerdown input in
Configuration Register 3 (CFG3), Address 0x001E, bit 7 INT_OE = 1. The
current driver doesn't do this and as result IRQs will not be generated by
DP83867 phy even if they are properly configured in DT.

Hence, fix IRQ generation by properly configuring CFG3.INT_OE bit and
ensure that Link Status Change (LINK_STATUS_CHNG_INT) and Auto-Negotiation
Complete (AUTONEG_COMP_INT) interrupt are enabled. After this the DP83867
driver will work properly in interrupt enabled mode.

Signed-off-by: Grygorii Strashko <***@ti.com>
Reviewed-by: Florian Fainelli <***@gmail.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/net/phy/dp83867.c | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 4cad95552cf1..01cf094bee18 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -29,6 +29,7 @@
#define MII_DP83867_MICR 0x12
#define MII_DP83867_ISR 0x13
#define DP83867_CTRL 0x1f
+#define DP83867_CFG3 0x1e

/* Extended Registers */
#define DP83867_RGMIICTL 0x0032
@@ -90,6 +91,8 @@ static int dp83867_config_intr(struct phy_device *phydev)
micr_status |=
(MII_DP83867_MICR_AN_ERR_INT_EN |
MII_DP83867_MICR_SPEED_CHNG_INT_EN |
+ MII_DP83867_MICR_AUTONEG_COMP_INT_EN |
+ MII_DP83867_MICR_LINK_STS_CHNG_INT_EN |
MII_DP83867_MICR_DUP_MODE_CHNG_INT_EN |
MII_DP83867_MICR_SLEEP_MODE_CHNG_INT_EN);

@@ -190,6 +193,13 @@ static int dp83867_config_init(struct phy_device *phydev)
DP83867_DEVADDR, delay);
}

+ /* Enable Interrupt output INT_OE in CFG3 register */
+ if (phy_interrupt_is_valid(phydev)) {
+ val = phy_read(phydev, DP83867_CFG3);
+ val |= BIT(7);
+ phy_write(phydev, DP83867_CFG3, val);
+ }
+
return 0;
}

[Levin, Alexander (Sasha Levin)]

From: Patrick Lai <***@codeaurora.org>

[ Upstream commit 9f169b9f52a4afccdab7a7d2311b0c53a78a1e6b ]

When multiple front-ends are using the same back-end, putting state of a
front-end to STOP state upon receiving pause command will result in backend
stream getting released by DPCM framework unintentionally. In order to
avoid backend to be released when another active front-end stream is
present, put the stream state to PAUSED state instead of STOP state.

Signed-off-by: Patrick Lai <***@codeaurora.org>
Signed-off-by: Mark Brown <***@kernel.org>
Signed-off-by: Sasha Levin <***@verizon.com>
---
sound/soc/soc-pcm.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index d56a16a0f6fa..21c3ef01c438 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -2184,9 +2184,11 @@ static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd)
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
fe->dpcm[stream].state = SND_SOC_DPCM_STATE_STOP;
break;
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ fe->dpcm[stream].state = SND_SOC_DPCM_STATE_PAUSED;
+ break;
}

out:

[Levin, Alexander (Sasha Levin)]

From: Omar Sandoval <***@fb.com>

[ Upstream commit 6bf6b0aa3da84a3d9126919a94c49c0fb7ee2fb3 ]

If blk_mq_init_queue() returns an error, it gets assigned to
vblk->disk->queue. Then, when we call put_disk(), we end up calling
blk_put_queue() with the ERR_PTR, causing a bad dereference. Fix it by
only assigning to vblk->disk->queue on success.

Signed-off-by: Omar Sandoval <***@fb.com>
Reviewed-by: Jeff Moyer <***@redhat.com>
Signed-off-by: Jens Axboe <***@fb.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/block/virtio_blk.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 3c3b8f601469..10332c24f961 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -630,11 +630,12 @@ static int virtblk_probe(struct virtio_device *vdev)
if (err)
goto out_put_disk;

- q = vblk->disk->queue = blk_mq_init_queue(&vblk->tag_set);
+ q = blk_mq_init_queue(&vblk->tag_set);
if (IS_ERR(q)) {
err = -ENOMEM;
goto out_free_tags;
}
+ vblk->disk->queue = q;

q->queuedata = vblk;

[Levin, Alexander (Sasha Levin)]

From: Pau Espin Pedrol <***@tessares.net>

[ Upstream commit cc31d43b4154ad5a7d8aa5543255a93b7e89edc2 ]

Otherwise, RST packets generated by ipt_REJECT always have mark 0 when
the routing is checked later in the same code path.

Fixes: e110861f8609 ("net: add a sysctl to reflect the fwmark on replies")
Cc: Lorenzo Colitti <***@google.com>
Signed-off-by: Pau Espin Pedrol <***@tessares.net>
Signed-off-by: Pablo Neira Ayuso <***@netfilter.org>
Signed-off-by: Sasha Levin <***@verizon.com>
---
net/ipv4/netfilter/nf_reject_ipv4.c | 2 ++
net/ipv6/netfilter/nf_reject_ipv6.c | 3 +++
2 files changed, 5 insertions(+)

diff --git a/net/ipv4/netfilter/nf_reject_ipv4.c b/net/ipv4/netfilter/nf_reject_ipv4.c
index fd8220213afc..146d86105183 100644
--- a/net/ipv4/netfilter/nf_reject_ipv4.c
+++ b/net/ipv4/netfilter/nf_reject_ipv4.c
@@ -126,6 +126,8 @@ void nf_send_reset(struct net *net, struct sk_buff *oldskb, int hook)
/* ip_route_me_harder expects skb->dst to be set */
skb_dst_set_noref(nskb, skb_dst(oldskb));

+ nskb->mark = IP4_REPLY_MARK(net, oldskb->mark);
+
skb_reserve(nskb, LL_MAX_HEADER);
niph = nf_reject_iphdr_put(nskb, oldskb, IPPROTO_TCP,
ip4_dst_hoplimit(skb_dst(nskb)));
diff --git a/net/ipv6/netfilter/nf_reject_ipv6.c b/net/ipv6/netfilter/nf_reject_ipv6.c
index 10090400c72f..eedee5d108d9 100644
--- a/net/ipv6/netfilter/nf_reject_ipv6.c
+++ b/net/ipv6/netfilter/nf_reject_ipv6.c
@@ -157,6 +157,7 @@ void nf_send_reset6(struct net *net, struct sk_buff *oldskb, int hook)
fl6.fl6_sport = otcph->dest;
fl6.fl6_dport = otcph->source;
fl6.flowi6_oif = l3mdev_master_ifindex(skb_dst(oldskb)->dev);
+ fl6.flowi6_mark = IP6_REPLY_MARK(net, oldskb->mark);
security_skb_classify_flow(oldskb, flowi6_to_flowi(&fl6));
dst = ip6_route_output(net, NULL, &fl6);
if (dst->error) {
@@ -180,6 +181,8 @@ void nf_send_reset6(struct net *net, struct sk_buff *oldskb, int hook)

skb_dst_set(nskb, dst);

+ nskb->mark = fl6.flowi6_mark;
+
skb_reserve(nskb, hh_len + dst->header_len);
ip6h = nf_reject_ip6hdr_put(nskb, oldskb, IPPROTO_TCP,
ip6_dst_hoplimit(dst));

[Levin, Alexander (Sasha Levin)]

From: "Rafael J. Wysocki" <***@intel.com>

[ Upstream commit c2a6bbaf0c5f90463a7011a295bbdb7e33c80b51 ]

The way acpi_find_child_device() works currently is that, if there
are two (or more) devices with the same _ADR value in the same
namespace scope (which is not specifically allowed by the spec and
the OS behavior in that case is not defined), the first one of them
found to be present (with the help of _STA) will be returned.

This covers the majority of cases, but is not sufficient if some of
the devices in question have a _HID (or _CID) returning some valid
ACPI/PNP device IDs (which is disallowed by the spec) and the
ASL writers' expectation appears to be that the OS will match
devices without a valid ACPI/PNP device ID against a given bus
address first.

To cover this special case as well, modify find_child_checks()
to prefer devices without ACPI/PNP device IDs over devices that
have them.

Suggested-by: Mika Westerberg <***@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <***@intel.com>
Tested-by: Hans de Goede <***@redhat.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/acpi/glue.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 5ea5dc219f56..73c9c7fa9001 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -98,7 +98,15 @@ static int find_child_checks(struct acpi_device *adev, bool check_children)
if (check_children && list_empty(&adev->children))
return -ENODEV;

- return sta_present ? FIND_CHILD_MAX_SCORE : FIND_CHILD_MIN_SCORE;
+ /*
+ * If the device has a _HID (or _CID) returning a valid ACPI/PNP
+ * device ID, it is better to make it look less attractive here, so that
+ * the other device with the same _ADR value (that may not have a valid
+ * device ID) can be matched going forward. [This means a second spec
+ * violation in a row, so whatever we do here is best effort anyway.]
+ */
+ return sta_present && list_empty(&adev->pnp.ids) ?
+ FIND_CHILD_MAX_SCORE : FIND_CHILD_MIN_SCORE;
}

struct acpi_device *acpi_find_child_device(struct acpi_device *parent,

[Levin, Alexander (Sasha Levin)]

From: Satish Kharat <***@cisco.com>

[ Upstream commit 9698b6f473555a722bf81a3371998427d5d27bde ]

This fix is to avoid calling fnic_fw_reset_handler through
fnic_host_reset when a finc reset is alreay in progress.

Signed-off-by: Satish Kharat <***@cisco.com>
Signed-off-by: Sesidhar Baddela <***@cisco.com>
Signed-off-by: Martin K. Petersen <***@oracle.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/scsi/fnic/fnic.h | 1 +
drivers/scsi/fnic/fnic_scsi.c | 16 ++++++++++++++++
2 files changed, 17 insertions(+)

diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h
index 9ddc9200e0a4..9e4b7709043e 100644
--- a/drivers/scsi/fnic/fnic.h
+++ b/drivers/scsi/fnic/fnic.h
@@ -248,6 +248,7 @@ struct fnic {
struct completion *remove_wait; /* device remove thread blocks */

atomic_t in_flight; /* io counter */
+ bool internal_reset_inprogress;
u32 _reserved; /* fill hole */
unsigned long state_flags; /* protected by host lock */
enum fnic_state state;
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index d9fd2f841585..44dd372aa7d3 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -2573,6 +2573,19 @@ int fnic_host_reset(struct scsi_cmnd *sc)
unsigned long wait_host_tmo;
struct Scsi_Host *shost = sc->device->host;
struct fc_lport *lp = shost_priv(shost);
+ struct fnic *fnic = lport_priv(lp);
+ unsigned long flags;
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ if (fnic->internal_reset_inprogress == 0) {
+ fnic->internal_reset_inprogress = 1;
+ } else {
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "host reset in progress skipping another host reset\n");
+ return SUCCESS;
+ }
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);

/*
* If fnic_reset is successful, wait for fabric login to complete
@@ -2593,6 +2606,9 @@ int fnic_host_reset(struct scsi_cmnd *sc)
}
}

+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ fnic->internal_reset_inprogress = 0;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
return ret;
}

[Levin, Alexander (Sasha Levin)]

From: Yuriy Kolerov <***@synopsys.com>

[ Upstream commit e51d5d02f688c45b6f644f472f0c80fdfa73f0cb ]

It is necessary to call entry/exit functions for parent interrupt
controllers for proper masking/unmasking of interrupt lines.

Signed-off-by: Yuriy Kolerov <***@synopsys.com>
Signed-off-by: Vineet Gupta <***@synopsys.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
arch/arc/kernel/mcip.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c
index f39142acc89e..be131b296a55 100644
--- a/arch/arc/kernel/mcip.c
+++ b/arch/arc/kernel/mcip.c
@@ -10,6 +10,7 @@

#include <linux/smp.h>
#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/spinlock.h>
#include <asm/irqflags-arcv2.h>
#include <asm/mcip.h>
@@ -221,10 +222,13 @@ static irq_hw_number_t idu_first_hwirq;
static void idu_cascade_isr(struct irq_desc *desc)
{
struct irq_domain *idu_domain = irq_desc_get_handler_data(desc);
+ struct irq_chip *core_chip = irq_desc_get_chip(desc);
irq_hw_number_t core_hwirq = irqd_to_hwirq(irq_desc_get_irq_data(desc));
irq_hw_number_t idu_hwirq = core_hwirq - idu_first_hwirq;

+ chained_irq_enter(core_chip, desc);
generic_handle_irq(irq_find_mapping(idu_domain, idu_hwirq));
+ chained_irq_exit(core_chip, desc);
}

static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq)

[Levin, Alexander (Sasha Levin)]

From: Gerd Hoffmann <***@redhat.com>

[ Upstream commit 71d3f6ef7f5af38dea2975ec5715c88bae92e92d ]

virtio uses normal ram as backing storage for the framebuffer, so we
should assign the address to new screen_buffer (added by commit
17a7b0b4d9749f80d365d7baff5dec2f54b0e992) instead of screen_base.

Reported-by: Michael S. Tsirkin <***@redhat.com>
Signed-off-by: Gerd Hoffmann <***@redhat.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/gpu/drm/virtio/virtgpu_fb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/virtio/virtgpu_fb.c b/drivers/gpu/drm/virtio/virtgpu_fb.c
index 2242a80866a9..dc2976c2bed3 100644
--- a/drivers/gpu/drm/virtio/virtgpu_fb.c
+++ b/drivers/gpu/drm/virtio/virtgpu_fb.c
@@ -337,7 +337,7 @@ static int virtio_gpufb_create(struct drm_fb_helper *helper,
info->fbops = &virtio_gpufb_ops;
info->pixmap.flags = FB_PIXMAP_SYSTEM;

- info->screen_base = obj->vmap;
+ info->screen_buffer = obj->vmap;
info->screen_size = obj->gem_base.size;
drm_fb_helper_fill_fix(info, fb->pitches[0], fb->depth);
drm_fb_helper_fill_var(info, &vfbdev->helper,

[Levin, Alexander (Sasha Levin)]

From: Zefir Kurtisi <***@neratec.com>

[ Upstream commit 811a919135b980bac8009d042acdccf10dc1ef5e ]

While in RUNNING state, phy_state_machine() checks for link changes by
comparing phydev->link before and after calling phy_read_status().
This works as long as it is guaranteed that phydev->link is never
changed outside the phy_state_machine().

If in some setups this happens, it causes the state machine to miss
a link loss and remain RUNNING despite phydev->link being 0.

This has been observed running a dsa setup with a process continuously
polling the link states over ethtool each second (SNMPD RFC-1213
agent). Disconnecting the link on a phy followed by a ETHTOOL_GSET
causes dsa_slave_get_settings() / dsa_slave_get_link_ksettings() to
call phy_read_status() and with that modify the link status - and
with that bricking the phy state machine.

This patch adds a fail-safe check while in RUNNING, which causes to
move to CHANGELINK when the link is gone and we are still RUNNING.

Signed-off-by: Zefir Kurtisi <***@neratec.com>
Reviewed-by: Florian Fainelli <***@gmail.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/net/phy/phy.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index edd30ebbf275..6e12401b5102 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1060,6 +1060,15 @@ void phy_state_machine(struct work_struct *work)
if (old_link != phydev->link)
phydev->state = PHY_CHANGELINK;
}
+ /*
+ * Failsafe: check that nobody set phydev->link=0 between two
+ * poll cycles, otherwise we won't leave RUNNING state as long
+ * as link remains down.
+ */
+ if (!phydev->link && phydev->state == PHY_RUNNING) {
+ phydev->state = PHY_CHANGELINK;
+ phydev_err(phydev, "no link in PHY_RUNNING\n");
+ }
break;
case PHY_CHANGELINK:
err = phy_read_status(phydev);

[Levin, Alexander (Sasha Levin)]

From: Benjamin Poirier <***@suse.com>

[ Upstream commit 2d1148f0f45079d25a0fa0d67e4fdb2a656d12fb ]

bna & bfa firmware version 3.2.5.1 was submitted to linux-firmware on
Feb 17 19:10:20 2015 -0500 in 0ab54ff1dc ("linux-firmware: Add QLogic BR
Series Adapter Firmware").

bna was updated to use the newer firmware on Feb 19 16:02:32 2015 -0500 in
3f307c3d70 ("bna: Update the Driver and Firmware Version")

bfa was not updated. I presume this was an oversight but it broke support
for bfa+bna cards such as the following
04:00.0 Fibre Channel [0c04]: Brocade Communications Systems, Inc.
1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
04:00.1 Fibre Channel [0c04]: Brocade Communications Systems, Inc.
1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
04:00.2 Ethernet controller [0200]: Brocade Communications Systems,
Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
04:00.3 Ethernet controller [0200]: Brocade Communications Systems,
Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)

Currently, if the bfa module is loaded first, bna fails to probe the
respective devices with
[ 215.026787] bna: QLogic BR-series 10G Ethernet driver - version: 3.2.25.1
[ 215.043707] bna 0000:04:00.2: bar0 mapped to ffffc90001fc0000, len 262144
[ 215.060656] bna 0000:04:00.2: initialization failed err=1
[ 215.073893] bna 0000:04:00.3: bar0 mapped to ffffc90002040000, len 262144
[ 215.090644] bna 0000:04:00.3: initialization failed err=1

Whereas if bna is loaded first, bfa fails with
[ 249.592109] QLogic BR-series BFA FC/FCOE SCSI driver - version: 3.2.25.0
[ 249.610738] bfa 0000:04:00.0: Running firmware version is incompatible with the driver version
[ 249.833513] bfa 0000:04:00.0: bfa init failed
[ 249.833919] scsi host6: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.0 driver: 3.2.25.0
[ 249.841446] bfa 0000:04:00.1: Running firmware version is incompatible with the driver version
[ 250.045449] bfa 0000:04:00.1: bfa init failed
[ 250.045962] scsi host7: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.1 driver: 3.2.25.0

Increase bfa's requested firmware version. Also increase the driver
version. I only tested that all of the devices probe without error.

Reported-by: Tim Ehlers <***@gwdg.de>
Signed-off-by: Benjamin Poirier <***@suse.com>
Acked-by: Rasesh Mody <***@cavium.com>
Signed-off-by: Martin K. Petersen <***@oracle.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/scsi/bfa/bfad.c | 6 +++---
drivers/scsi/bfa/bfad_drv.h | 2 +-
2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index 9d253cb83ee7..e70410beb83a 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -64,9 +64,9 @@ int max_rport_logins = BFA_FCS_MAX_RPORT_LOGINS;
u32 bfi_image_cb_size, bfi_image_ct_size, bfi_image_ct2_size;
u32 *bfi_image_cb, *bfi_image_ct, *bfi_image_ct2;

-#define BFAD_FW_FILE_CB "cbfw-3.2.3.0.bin"
-#define BFAD_FW_FILE_CT "ctfw-3.2.3.0.bin"
-#define BFAD_FW_FILE_CT2 "ct2fw-3.2.3.0.bin"
+#define BFAD_FW_FILE_CB "cbfw-3.2.5.1.bin"
+#define BFAD_FW_FILE_CT "ctfw-3.2.5.1.bin"
+#define BFAD_FW_FILE_CT2 "ct2fw-3.2.5.1.bin"

static u32 *bfad_load_fwimg(struct pci_dev *pdev);
static void bfad_free_fwimg(void);
diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h
index f9e862093a25..cfcfff48e8e1 100644
--- a/drivers/scsi/bfa/bfad_drv.h
+++ b/drivers/scsi/bfa/bfad_drv.h
@@ -58,7 +58,7 @@
#ifdef BFA_DRIVER_VERSION
#define BFAD_DRIVER_VERSION BFA_DRIVER_VERSION
#else
-#define BFAD_DRIVER_VERSION "3.2.25.0"
+#define BFAD_DRIVER_VERSION "3.2.25.1"
#endif

#define BFAD_PROTO_NAME FCPI_NAME

[Levin, Alexander (Sasha Levin)]

From: Rabin Vincent <***@axis.com>

[ Upstream commit 270c8cf1cacc69cb8d99dea812f06067a45e4609 ]

ARM has a few system calls (most notably mmap) for which the names of
the functions which are referenced in the syscall table do not match the
names of the syscall tracepoints. As a consequence of this, these
tracepoints are not made available. Implement
arch_syscall_match_sym_name to fix this and allow tracing even these
system calls.

Signed-off-by: Rabin Vincent <***@axis.com>
Signed-off-by: Russell King <rmk+***@arm.linux.org.uk>
Signed-off-by: Sasha Levin <***@verizon.com>
---
arch/arm/include/asm/ftrace.h | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)

diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index bfe2a2f5a644..22b73112b75f 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -54,6 +54,24 @@ static inline void *return_address(unsigned int level)

#define ftrace_return_address(n) return_address(n)

+#define ARCH_HAS_SYSCALL_MATCH_SYM_NAME
+
+static inline bool arch_syscall_match_sym_name(const char *sym,
+ const char *name)
+{
+ if (!strcmp(sym, "sys_mmap2"))
+ sym = "sys_mmap_pgoff";
+ else if (!strcmp(sym, "sys_statfs64_wrapper"))
+ sym = "sys_statfs64";
+ else if (!strcmp(sym, "sys_fstatfs64_wrapper"))
+ sym = "sys_fstatfs64";
+ else if (!strcmp(sym, "sys_arm_fadvise64_64"))
+ sym = "sys_fadvise64_64";
+
+ /* Ignore case since sym may start with "SyS" instead of "sys" */
+ return !strcasecmp(sym, name);
+}
+
#endif /* ifndef __ASSEMBLY__ */

#endif /* _ASM_ARM_FTRACE */

[Levin, Alexander (Sasha Levin)]

From: Chen-Yu Tsai <***@csie.org>

[ Upstream commit 6b546c2a15f9d8d3b1fb22adeb4063d497b08265 ]

Now that we disable the display engine by default, we need to re-enable
it for the Hummingbird A31, which already had its display pipeline
enabled.

Signed-off-by: Chen-Yu Tsai <***@csie.org>
Signed-off-by: Maxime Ripard <***@free-electrons.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index 9a74637f677f..d3f3f15d37e3 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -73,6 +73,10 @@
cpu-supply = <&reg_dcdc3>;
};

+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};

[Levin, Alexander (Sasha Levin)]

From: Sudip Mukherjee <***@gmail.com>

[ Upstream commit da0510c47519fe0999cffe316e1d370e29f952be ]

The build of frv allmodconfig was failing with the errors like:

/tmp/cc0JSPc3.s: Assembler messages:
/tmp/cc0JSPc3.s:1839: Error: symbol `.LSLT0' is already defined
/tmp/cc0JSPc3.s:1842: Error: symbol `.LASLTP0' is already defined
/tmp/cc0JSPc3.s:1969: Error: symbol `.LELTP0' is already defined
/tmp/cc0JSPc3.s:1970: Error: symbol `.LELT0' is already defined

Commit 866ced950bcd ("kbuild: Support split debug info v4") introduced
splitting the debug info and keeping that in a separate file. Somehow,
the frv-linux gcc did not like that and I am guessing that instead of
splitting it started copying. The first report about this is at:

https://lists.01.org/pipermail/kbuild-all/2015-July/010527.html.

I will try and see if this can work with frv and if still fails I will
open a bug report with gcc. But meanwhile this is the easiest option to
solve build failure of frv.

Fixes: 866ced950bcd ("kbuild: Support split debug info v4")
Link: http://lkml.kernel.org/r/1482062348-5352-1-git-send-email-***@gmail.com
Signed-off-by: Sudip Mukherjee <***@codethink.co.uk>
Reported-by: Fengguang Wu <***@intel.com>
Cc: Andi Kleen <***@linux.intel.com>
Cc: David Howells <***@redhat.com>
Signed-off-by: Andrew Morton <***@linux-foundation.org>
Signed-off-by: Linus Torvalds <***@linux-foundation.org>
Signed-off-by: Sasha Levin <***@verizon.com>
---
lib/Kconfig.debug | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index a6c8db1d62f6..f60e67217f18 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -145,7 +145,7 @@ config DEBUG_INFO_REDUCED

config DEBUG_INFO_SPLIT
bool "Produce split debuginfo in .dwo files"
- depends on DEBUG_INFO
+ depends on DEBUG_INFO && !FRV
help
Generate debug info into separate .dwo files. This significantly
reduces the build directory size for builds with DEBUG_INFO,

[Levin, Alexander (Sasha Levin)]

From: Peter Chen <***@nxp.com>

[ Upstream commit 63dfb0dac9055145db85ce764355aef2f563739a ]

The USB core may call reset_resume when it fails to resume asix device.
And USB core can recovery this abnormal resume at low level driver,
the same .resume at asix driver can work too. Add .reset_resume can
avoid disconnecting after backing from system resume, and NFS can
still be mounted after this commit.

Signed-off-by: Peter Chen <***@nxp.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/net/usb/asix_devices.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index dc7b6392e75a..50737def774c 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -1369,6 +1369,7 @@ static struct usb_driver asix_driver = {
.probe = usbnet_probe,
.suspend = asix_suspend,
.resume = asix_resume,
+ .reset_resume = asix_resume,
.disconnect = usbnet_disconnect,
.supports_autosuspend = 1,
.disable_hub_initiated_lpm = 1,

[Levin, Alexander (Sasha Levin)]

From: David Carrillo-Cisneros <***@google.com>

[ Upstream commit 74545f63890e38520eb4d1dbedcadaa9c0dbc824 ]

The conversion of Intel PMU drivers into modules did not include reference
counting. The machine will crash when attempting to access deleted code
if an event from a module PMU is started and the module removed before the
event is destroyed.

i.e. this crashes the machine:

$ insmod intel-rapl-perf.ko
$ perf stat -e power/energy-cores/ -C 0 &
$ rmmod intel-rapl-perf.ko

Set THIS_MODULE to pmu->module in Intel module PMUs so that generic code
can handle reference counting and deny rmmod while an event still exists.

Signed-off-by: David Carrillo-Cisneros <***@google.com>
Cc: Alexander Shishkin <***@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <***@redhat.com>
Cc: Borislav Petkov <***@suse.de>
Cc: Dave Hansen <***@linux.intel.com>
Cc: Jiri Olsa <***@redhat.com>
Cc: Kan Liang <***@intel.com>
Cc: Linus Torvalds <***@linux-foundation.org>
Cc: Paul Turner <***@google.com>
Cc: Peter Zijlstra <***@infradead.org>
Cc: Srinivas Pandruvada <***@linux.intel.com>
Cc: Stephane Eranian <***@google.com>
Cc: Thomas Gleixner <***@linutronix.de>
Link: http://lkml.kernel.org/r/1482455860-116269-1-git-send-email-***@google.com
Signed-off-by: Ingo Molnar <***@kernel.org>
Signed-off-by: Sasha Levin <***@verizon.com>
---
arch/x86/events/intel/cstate.c | 2 ++
arch/x86/events/intel/rapl.c | 1 +
arch/x86/events/intel/uncore.c | 1 +
3 files changed, 4 insertions(+)

diff --git a/arch/x86/events/intel/cstate.c b/arch/x86/events/intel/cstate.c
index fec8a461bdef..1076c9a77292 100644
--- a/arch/x86/events/intel/cstate.c
+++ b/arch/x86/events/intel/cstate.c
@@ -434,6 +434,7 @@ static struct pmu cstate_core_pmu = {
.stop = cstate_pmu_event_stop,
.read = cstate_pmu_event_update,
.capabilities = PERF_PMU_CAP_NO_INTERRUPT,
+ .module = THIS_MODULE,
};

static struct pmu cstate_pkg_pmu = {
@@ -447,6 +448,7 @@ static struct pmu cstate_pkg_pmu = {
.stop = cstate_pmu_event_stop,
.read = cstate_pmu_event_update,
.capabilities = PERF_PMU_CAP_NO_INTERRUPT,
+ .module = THIS_MODULE,
};

static const struct cstate_model nhm_cstates __initconst = {
diff --git a/arch/x86/events/intel/rapl.c b/arch/x86/events/intel/rapl.c
index 8b902b67342a..970c1de3b86e 100644
--- a/arch/x86/events/intel/rapl.c
+++ b/arch/x86/events/intel/rapl.c
@@ -697,6 +697,7 @@ static int __init init_rapl_pmus(void)
rapl_pmus->pmu.start = rapl_pmu_event_start;
rapl_pmus->pmu.stop = rapl_pmu_event_stop;
rapl_pmus->pmu.read = rapl_pmu_event_read;
+ rapl_pmus->pmu.module = THIS_MODULE;
return 0;
}

diff --git a/arch/x86/events/intel/uncore.c b/arch/x86/events/intel/uncore.c
index 19d646a783fd..aec6cc925af8 100644
--- a/arch/x86/events/intel/uncore.c
+++ b/arch/x86/events/intel/uncore.c
@@ -733,6 +733,7 @@ static int uncore_pmu_register(struct intel_uncore_pmu *pmu)
.start = uncore_pmu_event_start,
.stop = uncore_pmu_event_stop,
.read = uncore_pmu_event_read,
+ .module = THIS_MODULE,
};
} else {
pmu->pmu = *pmu->type->pmu;

[Levin, Alexander (Sasha Levin)]

From: Sabrina Dubroca <***@queasysnail.net>

[ Upstream commit 096de2f83ebc8e0404c5b7e847a4abd27b9739da ]

When VXLAN offloading is enabled, be_features_check() tries to check if
an encapsulated packet is indeed a VXLAN packet. The check is not strict
enough, and considers any UDP-encapsulated ethernet frame with a 8-byte
tunnel header as being VXLAN. Unfortunately, both GENEVE and VXLAN-GPE
have a 8-byte header, so they get through this check.

Force the UDP destination port to be the one that has been offloaded to
hardware.

Without this, GENEVE-encapsulated packets can end up having an incorrect
checksum when both a GENEVE and a VXLAN (offloaded) tunnel are
configured.

This is similar to commit a547224dceed ("mlx4e: Do not attempt to
offload VXLAN ports that are unrecognized").

Signed-off-by: Sabrina Dubroca <***@queasysnail.net>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/net/ethernet/emulex/benet/be_main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index b3c9cbef766e..5626908f3f7a 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -5186,7 +5186,9 @@ static netdev_features_t be_features_check(struct sk_buff *skb,
skb->inner_protocol_type != ENCAP_TYPE_ETHER ||
skb->inner_protocol != htons(ETH_P_TEB) ||
skb_inner_mac_header(skb) - skb_transport_header(skb) !=
- sizeof(struct udphdr) + sizeof(struct vxlanhdr))
+ sizeof(struct udphdr) + sizeof(struct vxlanhdr) ||
+ !adapter->vxlan_port ||
+ udp_hdr(skb)->dest != adapter->vxlan_port)
return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);

return features;

[Levin, Alexander (Sasha Levin)]

From: Liu Bo <***@oracle.com>

[ Upstream commit 781feef7e6befafd4d9787d1f7ada1f9ccd504e4 ]

While checking INODE_REF/INODE_EXTREF for a corner case, we may acquire a
different inode's log_mutex with holding the current inode's log_mutex, and
lockdep has complained this with a possilble deadlock warning.

Fix this by using mutex_lock_nested() when processing the other inode's
log_mutex.

Reviewed-by: Filipe Manana <***@suse.com>
Signed-off-by: Liu Bo <***@oracle.com>
Signed-off-by: David Sterba <***@suse.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
fs/btrfs/tree-log.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index b89004513c09..309313b71617 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -37,6 +37,7 @@
*/
#define LOG_INODE_ALL 0
#define LOG_INODE_EXISTS 1
+#define LOG_OTHER_INODE 2

/*
* directory trouble cases
@@ -4623,7 +4624,7 @@ static int btrfs_log_inode(struct btrfs_trans_handle *trans,
if (S_ISDIR(inode->i_mode) ||
(!test_bit(BTRFS_INODE_NEEDS_FULL_SYNC,
&BTRFS_I(inode)->runtime_flags) &&
- inode_only == LOG_INODE_EXISTS))
+ inode_only >= LOG_INODE_EXISTS))
max_key.type = BTRFS_XATTR_ITEM_KEY;
else
max_key.type = (u8)-1;
@@ -4647,7 +4648,13 @@ static int btrfs_log_inode(struct btrfs_trans_handle *trans,
return ret;
}

- mutex_lock(&BTRFS_I(inode)->log_mutex);
+ if (inode_only == LOG_OTHER_INODE) {
+ inode_only = LOG_INODE_EXISTS;
+ mutex_lock_nested(&BTRFS_I(inode)->log_mutex,
+ SINGLE_DEPTH_NESTING);
+ } else {
+ mutex_lock(&BTRFS_I(inode)->log_mutex);
+ }

/*
* a brute force approach to making sure we get the most uptodate
@@ -4799,7 +4806,7 @@ static int btrfs_log_inode(struct btrfs_trans_handle *trans,
* unpin it.
*/
err = btrfs_log_inode(trans, root, other_inode,
- LOG_INODE_EXISTS,
+ LOG_OTHER_INODE,
0, LLONG_MAX, ctx);
iput(other_inode);
if (err)

[Levin, Alexander (Sasha Levin)]

From: Michal Simek <***@xilinx.com>

[ Upstream commit 4ea2a6be9565455f152c12f80222af1582ede0c7 ]

The patch removes these warnings reported by dtc 1.4:
Warning (unit_address_vs_reg): Node /amba_apu has a reg or ranges
property, but no unit name
Warning (unit_address_vs_reg): Node /memory has a reg or ranges
property, but no unit name

Signed-off-by: Michal Simek <***@xilinx.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
index 358089687a69..ef1b9e573af0 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
@@ -27,7 +27,7 @@
stdout-path = "serial0:115200n8";
};

- memory {
+ ***@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 68a908334c7b..83791eadff41 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -72,7 +72,7 @@
<1 10 0xf08>;
};

- amba_apu {
+ amba_apu: ***@0 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;

[Levin, Alexander (Sasha Levin)]

From: Jamie Iles <***@oracle.com>

[ Upstream commit 2d39b3cd34e6d323720d4c61bd714f5ae202c022 ]

Since commit 00cd5c37afd5 ("ptrace: permit ptracing of /sbin/init") we
can now trace init processes. init is initially protected with
SIGNAL_UNKILLABLE which will prevent fatal signals such as SIGSTOP, but
there are a number of paths during tracing where SIGNAL_UNKILLABLE can
be implicitly cleared.

This can result in init becoming stoppable/killable after tracing. For
example, running:

while true; do kill -STOP 1; done &
strace -p 1

and then stopping strace and the kill loop will result in init being
left in state TASK_STOPPED. Sending SIGCONT to init will resume it, but
init will now respond to future SIGSTOP signals rather than ignoring
them.

Make sure that when setting SIGNAL_STOP_CONTINUED/SIGNAL_STOP_STOPPED
that we don't clear SIGNAL_UNKILLABLE.

Link: http://lkml.kernel.org/r/20170104122017.25047-1-***@oracle.com
Signed-off-by: Jamie Iles <***@oracle.com>
Acked-by: Oleg Nesterov <***@redhat.com>
Cc: Alexander Viro <***@zeniv.linux.org.uk>
Cc: Ingo Molnar <***@redhat.com>
Cc: Peter Zijlstra <***@infradead.org>
Signed-off-by: Andrew Morton <***@linux-foundation.org>
Signed-off-by: Linus Torvalds <***@linux-foundation.org>
Signed-off-by: Sasha Levin <***@verizon.com>
---
include/linux/sched.h | 10 ++++++++++
kernel/signal.c | 4 ++--
2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/include/linux/sched.h b/include/linux/sched.h
index f425eb3318ab..14f58cf06054 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -830,6 +830,16 @@ struct signal_struct {

#define SIGNAL_UNKILLABLE 0x00000040 /* for init: ignore fatal signals */

+#define SIGNAL_STOP_MASK (SIGNAL_CLD_MASK | SIGNAL_STOP_STOPPED | \
+ SIGNAL_STOP_CONTINUED)
+
+static inline void signal_set_stop_flags(struct signal_struct *sig,
+ unsigned int flags)
+{
+ WARN_ON(sig->flags & (SIGNAL_GROUP_EXIT|SIGNAL_GROUP_COREDUMP));
+ sig->flags = (sig->flags & ~SIGNAL_STOP_MASK) | flags;
+}
+
/* If true, all threads except ->group_exit_task have pending SIGKILL */
static inline int signal_group_exit(const struct signal_struct *sig)
{
diff --git a/kernel/signal.c b/kernel/signal.c
index deb04d5983ed..e48668c3c972 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -346,7 +346,7 @@ static bool task_participate_group_stop(struct task_struct *task)
* fresh group stop. Read comment in do_signal_stop() for details.
*/
if (!sig->group_stop_count && !(sig->flags & SIGNAL_STOP_STOPPED)) {
- sig->flags = SIGNAL_STOP_STOPPED;
+ signal_set_stop_flags(sig, SIGNAL_STOP_STOPPED);
return true;
}
return false;
@@ -845,7 +845,7 @@ static bool prepare_signal(int sig, struct task_struct *p, bool force)
* will take ->siglock, notice SIGNAL_CLD_MASK, and
* notify its parent. See get_signal_to_deliver().
*/
- signal->flags = why | SIGNAL_STOP_CONTINUED;
+ signal_set_stop_flags(signal, why | SIGNAL_STOP_CONTINUED);
signal->group_stop_count = 0;
signal->group_exit_code = 0;
}

[Levin, Alexander (Sasha Levin)]

From: Or Gerlitz <***@mellanox.com>

[ Upstream commit 5bae8c031053c69b4aa74b7f1ba15d4ec8426208 ]

We must re-enable RoCE on the e-switch management port (PF) only after destroying
the FDB in its switchdev/offloaded mode. Otherwise, when encapsulation is supported,
this re-enablement will fail.

Also, it's more natural and symmetric to disable RoCE on the PF before we create
the FDB under switchdev mode, so do that as well and revert if getting into error
during the mode change later.

Fixes: 9da34cd34e85 ('net/mlx5: Disable RoCE on the e-switch management [..]')
Signed-off-by: Or Gerlitz <***@mellanox.com>
Reviewed-by: Hadar Hen Zion <***@mellanox.com>
Signed-off-by: Saeed Mahameed <***@mellanox.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
.../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 29 ++++++++++++++--------
1 file changed, 18 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index 6ffd5d2a70aa..52a38106448e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -651,9 +651,14 @@ int esw_offloads_init(struct mlx5_eswitch *esw, int nvports)
int vport;
int err;

+ /* disable PF RoCE so missed packets don't go through RoCE steering */
+ mlx5_dev_list_lock();
+ mlx5_remove_dev_by_protocol(esw->dev, MLX5_INTERFACE_PROTOCOL_IB);
+ mlx5_dev_list_unlock();
+
err = esw_create_offloads_fdb_table(esw, nvports);
if (err)
- return err;
+ goto create_fdb_err;

err = esw_create_offloads_table(esw);
if (err)
@@ -673,11 +678,6 @@ int esw_offloads_init(struct mlx5_eswitch *esw, int nvports)
goto err_reps;
}

- /* disable PF RoCE so missed packets don't go through RoCE steering */
- mlx5_dev_list_lock();
- mlx5_remove_dev_by_protocol(esw->dev, MLX5_INTERFACE_PROTOCOL_IB);
- mlx5_dev_list_unlock();
-
return 0;

err_reps:
@@ -694,6 +694,13 @@ int esw_offloads_init(struct mlx5_eswitch *esw, int nvports)

create_ft_err:
esw_destroy_offloads_fdb_table(esw);
+
+create_fdb_err:
+ /* enable back PF RoCE */
+ mlx5_dev_list_lock();
+ mlx5_add_dev_by_protocol(esw->dev, MLX5_INTERFACE_PROTOCOL_IB);
+ mlx5_dev_list_unlock();
+
return err;
}

@@ -701,11 +708,6 @@ static int esw_offloads_stop(struct mlx5_eswitch *esw)
{
int err, err1, num_vfs = esw->dev->priv.sriov.num_vfs;

- /* enable back PF RoCE */
- mlx5_dev_list_lock();
- mlx5_add_dev_by_protocol(esw->dev, MLX5_INTERFACE_PROTOCOL_IB);
- mlx5_dev_list_unlock();
-
mlx5_eswitch_disable_sriov(esw);
err = mlx5_eswitch_enable_sriov(esw, num_vfs, SRIOV_LEGACY);
if (err) {
@@ -715,6 +717,11 @@ static int esw_offloads_stop(struct mlx5_eswitch *esw)
esw_warn(esw->dev, "Failed setting eswitch back to offloads, err %d\n", err);
}

+ /* enable back PF RoCE */
+ mlx5_dev_list_lock();
+ mlx5_add_dev_by_protocol(esw->dev, MLX5_INTERFACE_PROTOCOL_IB);
+ mlx5_dev_list_unlock();
+
return err;
}

[Levin, Alexander (Sasha Levin)]

From: Michal Hocko <***@suse.com>

[ Upstream commit bb1107f7c6052c863692a41f78c000db792334bf ]

Andrey Konovalov has reported the following warning triggered by the
syzkaller fuzzer.

WARNING: CPU: 1 PID: 9935 at mm/page_alloc.c:3511 __alloc_pages_nodemask+0x159c/0x1e20
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 9935 Comm: syz-executor0 Not tainted 4.9.0-rc7+ #34
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__alloc_pages_slowpath mm/page_alloc.c:3511
__alloc_pages_nodemask+0x159c/0x1e20 mm/page_alloc.c:3781
alloc_pages_current+0x1c7/0x6b0 mm/mempolicy.c:2072
alloc_pages include/linux/gfp.h:469
kmalloc_order+0x1f/0x70 mm/slab_common.c:1015
kmalloc_order_trace+0x1f/0x160 mm/slab_common.c:1026
kmalloc_large include/linux/slab.h:422
__kmalloc+0x210/0x2d0 mm/slub.c:3723
kmalloc include/linux/slab.h:495
ep_write_iter+0x167/0xb50 drivers/usb/gadget/legacy/inode.c:664
new_sync_write fs/read_write.c:499
__vfs_write+0x483/0x760 fs/read_write.c:512
vfs_write+0x170/0x4e0 fs/read_write.c:560
SYSC_write fs/read_write.c:607
SyS_write+0xfb/0x230 fs/read_write.c:599
entry_SYSCALL_64_fastpath+0x1f/0xc2

The issue is caused by a lack of size check for the request size in
ep_write_iter which should be fixed. It, however, points to another
problem, that SLUB defines KMALLOC_MAX_SIZE too large because the its
KMALLOC_SHIFT_MAX is (MAX_ORDER + PAGE_SHIFT) which means that the
resulting page allocator request might be MAX_ORDER which is too large
(see __alloc_pages_slowpath).

The same applies to the SLOB allocator which allows even larger sizes.
Make sure that they are capped properly and never request more than
MAX_ORDER order.

Link: http://lkml.kernel.org/r/20161220130659.16461-2-***@kernel.org
Signed-off-by: Michal Hocko <***@suse.com>
Reported-by: Andrey Konovalov <***@google.com>
Acked-by: Christoph Lameter <***@linux.com>
Cc: Alexei Starovoitov <***@kernel.org>
Signed-off-by: Andrew Morton <***@linux-foundation.org>
Signed-off-by: Linus Torvalds <***@linux-foundation.org>
Signed-off-by: Sasha Levin <***@verizon.com>
---
include/linux/slab.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/slab.h b/include/linux/slab.h
index 084b12bad198..4c5363566815 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -226,7 +226,7 @@ static inline const char *__check_heap_object(const void *ptr,
* (PAGE_SIZE*2). Larger requests are passed to the page allocator.
*/
#define KMALLOC_SHIFT_HIGH (PAGE_SHIFT + 1)
-#define KMALLOC_SHIFT_MAX (MAX_ORDER + PAGE_SHIFT)
+#define KMALLOC_SHIFT_MAX (MAX_ORDER + PAGE_SHIFT - 1)
#ifndef KMALLOC_SHIFT_LOW
#define KMALLOC_SHIFT_LOW 3
#endif
@@ -239,7 +239,7 @@ static inline const char *__check_heap_object(const void *ptr,
* be allocated from the same page.
*/
#define KMALLOC_SHIFT_HIGH PAGE_SHIFT
-#define KMALLOC_SHIFT_MAX 30
+#define KMALLOC_SHIFT_MAX (MAX_ORDER + PAGE_SHIFT - 1)
#ifndef KMALLOC_SHIFT_LOW
#define KMALLOC_SHIFT_LOW 3
#endif

[Levin, Alexander (Sasha Levin)]

From: Sergei Shtylyov <***@cogentembedded.com>

[ Upstream commit 0f1f9cbc04dbb3cc310f70a11cba0cf1f2109d9c ]

The R8A7740 GEther controller supports the packet checksum offloading
but the 'hw_crc' (bad name, I'll fix it) flag isn't set in the R8A7740
data, thus CSMR isn't cleared...

Fixes: 73a0d907301e ("net: sh_eth: add support R8A7740")
Signed-off-by: Sergei Shtylyov <***@cogentembedded.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/net/ethernet/renesas/sh_eth.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index be2520e977d7..2140dedab712 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -574,6 +574,7 @@ static struct sh_eth_cpu_data r8a7740_data = {
.rpadir_value = 2 << 16,
.no_trimd = 1,
.no_ade = 1,
+ .hw_crc = 1,
.tsu = 1,
.select_mii = 1,
.shift_rd0 = 1,

[Levin, Alexander (Sasha Levin)]

From: Mark Rutland <***@arm.com>

[ Upstream commit 6ef4fb387d50fa8f3bffdffc868b57e981cdd709 ]

Recent changes made KERN_CONT mandatory for continued lines. In the
absence of KERN_CONT, a newline may be implicit inserted by the core
printk code.

In show_pte, we (erroneously) use printk without KERN_CONT for continued
prints, resulting in output being split across a number of lines, and
not matching the intended output, e.g.

[ff000000000000] *pgd=00000009f511b003
, *pud=00000009f4a80003
, *pmd=0000000000000000

Fix this by using pr_cont() for all the continuations.

Acked-by: Will Deacon <***@arm.com>
Signed-off-by: Mark Rutland <***@arm.com>
Signed-off-by: Catalin Marinas <***@arm.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
arch/arm64/mm/fault.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index 8b8ac3db4092..0e90c7e0279c 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -101,21 +101,21 @@ void show_pte(struct mm_struct *mm, unsigned long addr)
break;

pud = pud_offset(pgd, addr);
- printk(", *pud=%016llx", pud_val(*pud));
+ pr_cont(", *pud=%016llx", pud_val(*pud));
if (pud_none(*pud) || pud_bad(*pud))
break;

pmd = pmd_offset(pud, addr);
- printk(", *pmd=%016llx", pmd_val(*pmd));
+ pr_cont(", *pmd=%016llx", pmd_val(*pmd));
if (pmd_none(*pmd) || pmd_bad(*pmd))
break;

pte = pte_offset_map(pmd, addr);
- printk(", *pte=%016llx", pte_val(*pte));
+ pr_cont(", *pte=%016llx", pte_val(*pte));
pte_unmap(pte);
} while(0);

- printk("\n");
+ pr_cont("\n");
}

#ifdef CONFIG_ARM64_HW_AFDBM

[Levin, Alexander (Sasha Levin)]

From: Masami Hiramatsu <***@kernel.org>

[ Upstream commit 8a937a25a7e3c19d5fb3f9d92f605cf5fda219d8 ]

Fix perf-probe to show probe definition on gcc generated symbols for
offline kernel (including cross-arch kernel image).

gcc sometimes optimizes functions and generate new symbols with suffixes
such as ".constprop.N" or ".isra.N" etc. Since those symbol names are
not recorded in DWARF, we have to find correct generated symbols from
offline ELF binary to probe on it (kallsyms doesn't correct it). For
online kernel or uprobes we don't need it because those are rebased on
_text, or a section relative address.

E.g. Without this:

$ perf probe -k build-arm/vmlinux -F __slab_alloc*
__slab_alloc.constprop.9
$ perf probe -k build-arm/vmlinux -D __slab_alloc
p:probe/__slab_alloc __slab_alloc+0

If you put above definition on target machine, it should fail
because there is no __slab_alloc in kallsyms.

With this fix, perf probe shows correct probe definition on
__slab_alloc.constprop.9:

$ perf probe -k build-arm/vmlinux -D __slab_alloc
p:probe/__slab_alloc __slab_alloc.constprop.9+0

Signed-off-by: Masami Hiramatsu <***@kernel.org>
Cc: Jiri Olsa <***@redhat.com>
Cc: Namhyung Kim <***@kernel.org>
Cc: Peter Zijlstra <***@infradead.org>
Link: http://lkml.kernel.org/r/***@devbox
Signed-off-by: Arnaldo Carvalho de Melo <***@redhat.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
tools/perf/util/probe-event.c | 48 ++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 47 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index 7f1420521ede..8ac67703efa7 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -618,6 +618,51 @@ static int find_perf_probe_point_from_dwarf(struct probe_trace_point *tp,
return ret ? : -ENOENT;
}

+/*
+ * Rename DWARF symbols to ELF symbols -- gcc sometimes optimizes functions
+ * and generate new symbols with suffixes such as .constprop.N or .isra.N
+ * etc. Since those symbols are not recorded in DWARF, we have to find
+ * correct generated symbols from offline ELF binary.
+ * For online kernel or uprobes we don't need this because those are
+ * rebased on _text, or already a section relative address.
+ */
+static int
+post_process_offline_probe_trace_events(struct probe_trace_event *tevs,
+ int ntevs, const char *pathname)
+{
+ struct symbol *sym;
+ struct map *map;
+ unsigned long stext = 0;
+ u64 addr;
+ int i;
+
+ /* Prepare a map for offline binary */
+ map = dso__new_map(pathname);
+ if (!map || get_text_start_address(pathname, &stext) < 0) {
+ pr_warning("Failed to get ELF symbols for %s\n", pathname);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ntevs; i++) {
+ addr = tevs[i].point.address + tevs[i].point.offset - stext;
+ sym = map__find_symbol(map, addr);
+ if (!sym)
+ continue;
+ if (!strcmp(sym->name, tevs[i].point.symbol))
+ continue;
+ /* If we have no realname, use symbol for it */
+ if (!tevs[i].point.realname)
+ tevs[i].point.realname = tevs[i].point.symbol;
+ else
+ free(tevs[i].point.symbol);
+ tevs[i].point.symbol = strdup(sym->name);
+ tevs[i].point.offset = addr - sym->start;
+ }
+ map__put(map);
+
+ return 0;
+}
+
static int add_exec_to_probe_trace_events(struct probe_trace_event *tevs,
int ntevs, const char *exec)
{
@@ -694,7 +739,8 @@ post_process_kernel_probe_trace_events(struct probe_trace_event *tevs,

/* Skip post process if the target is an offline kernel */
if (symbol_conf.ignore_vmlinux_buildid)
- return 0;
+ return post_process_offline_probe_trace_events(tevs, ntevs,
+ symbol_conf.vmlinux_name);

reloc_sym = kernel_get_ref_reloc_sym();
if (!reloc_sym) {

[Levin, Alexander (Sasha Levin)]

From: Milo Kim <***@gmail.com>

[ Upstream commit 661ccdc1a95f18ab6c1373322fde09afd5b90a1f ]

The commit 10efbf5f1633 ("ARM: dts: sun8i: Add dts file for NanoPi M1 SBC")
introduced NanoPi M1 board but it's missing in Allwinner H3 DTB build.

Signed-off-by: Milo Kim <***@gmail.com>
Signed-off-by: Maxime Ripard <***@free-electrons.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
arch/arm/boot/dts/Makefile | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7037201c5e3a..f3baa896ce84 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -820,6 +820,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-a83t-allwinner-h8homlet-v2.dtb \
sun8i-a83t-cubietruck-plus.dtb \
sun8i-h3-bananapi-m2-plus.dtb \
+ sun8i-h3-nanopi-m1.dtb \
sun8i-h3-nanopi-neo.dtb \
sun8i-h3-orangepi-2.dtb \
sun8i-h3-orangepi-lite.dtb \

[Levin, Alexander (Sasha Levin)]

From: Steve Wise <***@opengridcomputing.com>

[ Upstream commit 3bcf96e0183f5c863657cb6ae9adad307a0f6071 ]

Function rx_data(), which handles ingress CPL_RX_DATA messages, was
always sending an RX_DATA_ACK with the goal of updating the credits.
However, if the RDMA connection is moved out of FPDU mode abruptly,
then it is possible for iw_cxgb4 to process queued RX_DATA CPLs after HW
has aborted the connection. These CPLs should not trigger RX_DATA_ACKS.
If they do, HW can see a READ after DELETE of the DB_LE hash entry for
the tid and post a LE_DB HashTblMemCrcError.

Signed-off-by: Steve Wise <***@opengridcomputing.com>
Signed-off-by: Doug Ledford <***@redhat.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/infiniband/hw/cxgb4/cm.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index f1510cc76d2d..9398143d7c5e 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -1804,20 +1804,21 @@ static int rx_data(struct c4iw_dev *dev, struct sk_buff *skb)
skb_trim(skb, dlen);
mutex_lock(&ep->com.mutex);

- /* update RX credits */
- update_rx_credits(ep, dlen);
-
switch (ep->com.state) {
case MPA_REQ_SENT:
+ update_rx_credits(ep, dlen);
ep->rcv_seq += dlen;
disconnect = process_mpa_reply(ep, skb);
break;
case MPA_REQ_WAIT:
+ update_rx_credits(ep, dlen);
ep->rcv_seq += dlen;
disconnect = process_mpa_request(ep, skb);
break;
case FPDU_MODE: {
struct c4iw_qp_attributes attrs;
+
+ update_rx_credits(ep, dlen);
BUG_ON(!ep->com.qp);
if (status)
pr_err("%s Unexpected streaming data." \

[Levin, Alexander (Sasha Levin)]

From: Arnd Bergmann <***@arndb.de>

[ Upstream commit 45e869714489431625c569d21fc952428d761476 ]

Using ancient compilers (gcc-4.5 or older) on ARM, we get a link
failure with the vfio-pci driver:

ERROR: "__aeabi_lcmp" [drivers/vfio/pci/vfio-pci.ko] undefined!

The reason is that the compiler tries to do a comparison of
a 64-bit range. This changes it to convert to a 32-bit number
explicitly first, as newer compilers do for themselves.

Signed-off-by: Arnd Bergmann <***@arndb.de>
Signed-off-by: Alex Williamson <***@redhat.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/vfio/pci/vfio_pci_rdwr.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/vfio/pci/vfio_pci_rdwr.c b/drivers/vfio/pci/vfio_pci_rdwr.c
index 5ffd1d9ad4bd..357243d76f10 100644
--- a/drivers/vfio/pci/vfio_pci_rdwr.c
+++ b/drivers/vfio/pci/vfio_pci_rdwr.c
@@ -193,7 +193,10 @@ ssize_t vfio_pci_vga_rw(struct vfio_pci_device *vdev, char __user *buf,
if (!vdev->has_vga)
return -EINVAL;

- switch (pos) {
+ if (pos > 0xbfffful)
+ return -EINVAL;
+
+ switch ((u32)pos) {
case 0xa0000 ... 0xbffff:
count = min(count, (size_t)(0xc0000 - pos));
iomem = ioremap_nocache(0xa0000, 0xbffff - 0xa0000 + 1);

[Levin, Alexander (Sasha Levin)]

From: Jeff Moyer <***@redhat.com>

[ Upstream commit 25b4acfc7de0fc4da3bfea3a316f7282c6fbde81 ]

Additionally, don't assign directly to disk->queue, otherwise
blk_put_queue (called via put_disk) will choke (panic) on the errno
stored there.

Bug found by code inspection after Omar found a similar issue in
virtio_blk. Compile-tested only.

Signed-off-by: Jeff Moyer <***@redhat.com>
Reviewed-by: Omar Sandoval <***@fb.com>
Reviewed-by: Josef Bacik <***@fb.com>
Signed-off-by: Jens Axboe <***@fb.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/block/nbd.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index c9441f9d4585..98b767d3171e 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -929,6 +929,7 @@ static int __init nbd_init(void)
return -ENOMEM;

for (i = 0; i < nbds_max; i++) {
+ struct request_queue *q;
struct gendisk *disk = alloc_disk(1 << part_shift);
if (!disk)
goto out;
@@ -954,12 +955,13 @@ static int __init nbd_init(void)
* every gendisk to have its very own request_queue struct.
* These structs are big so we dynamically allocate them.
*/
- disk->queue = blk_mq_init_queue(&nbd_dev[i].tag_set);
- if (!disk->queue) {
+ q = blk_mq_init_queue(&nbd_dev[i].tag_set);
+ if (IS_ERR(q)) {
blk_mq_free_tag_set(&nbd_dev[i].tag_set);
put_disk(disk);
goto out;
}
+ disk->queue = q;

/*
* Tell the block layer that we are not a rotational device

[Levin, Alexander (Sasha Levin)]

From: Pierre-Louis Bossart <pierre-***@linux.intel.com>

[ Upstream commit 60448b077ed93d227e6c117a9e87db76ff0c1911 ]

Frequency value of zero did not make sense, use same 24.576MHz
setting and only change the clock source in idle mode

Suggested-by: Bard Liao <***@realtek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-***@linux.intel.com>
Signed-off-by: Mark Brown <***@kernel.org>
Signed-off-by: Sasha Levin <***@verizon.com>
---
sound/soc/intel/boards/bytcr_rt5640.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index d5873eeae1aa..bd19fad2d91b 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -142,7 +142,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
* for Jack detection and button press
*/
ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_RCCLK,
- 0,
+ 48000 * 512,
SND_SOC_CLOCK_IN);
if (!ret) {
if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && priv->mclk)

[Levin, Alexander (Sasha Levin)]

From: Jeeja KP <***@intel.com>

[ Upstream commit bc65a326c579e93a5c2120a65ede72f11369ee5a ]

Saved firmware ctx was not never released, so release Firmware
ctx in cleanup routine.

Signed-off-by: Jeeja KP <***@intel.com>
Acked-by: Vinod Koul <***@intel.com>
Signed-off-by: Mark Brown <***@kernel.org>
Signed-off-by: Sasha Levin <***@verizon.com>
---
sound/soc/intel/skylake/skl-sst.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/sound/soc/intel/skylake/skl-sst.c b/sound/soc/intel/skylake/skl-sst.c
index 8fc3178bc79c..b30bd384c8d3 100644
--- a/sound/soc/intel/skylake/skl-sst.c
+++ b/sound/soc/intel/skylake/skl-sst.c
@@ -515,6 +515,9 @@ EXPORT_SYMBOL_GPL(skl_sst_init_fw);

void skl_sst_dsp_cleanup(struct device *dev, struct skl_sst *ctx)
{
+
+ if (ctx->dsp->fw)
+ release_firmware(ctx->dsp->fw);
skl_clear_module_table(ctx->dsp);
skl_freeup_uuid_list(ctx);
skl_ipc_free(&ctx->ipc);

[Levin, Alexander (Sasha Levin)]

From: Daniel Schultz <***@phytec.de>

[ Upstream commit 14ba972842f9e84e6d3264bc0302101b8a792288 ]

All i.MX6 SoCs have an OCOTP Controller with 4kbit fuses. The i.MX6SL is
an exception and has only 2kbit fuses.

In the TRM for the i.MX6DQ (IMX6QDRM - Rev 2, 06/2014) the fuses size is
described in chapter 46.1.1 with:
"32-bit word restricted program and read to 4Kbits of eFuse OTP(512x8)."

In the TRM for the i.MX6SL (IMX6SLRM - Rev 2, 06/2015) the fuses size is
described in chapter 34.1.1 with:
"32-bit word restricted program and read to 2 kbit of eFuse OTP(128x8)."

Since the Freescale Linux kernel OCOTP driver works with a fuses size of
2 kbit for the i.MX6SL, it looks like the TRM is wrong and the formula
to calculate the correct fuses size has to be 256x8.

Signed-off-by: Daniel Schultz <***@phytec.de>
Signed-off-by: Srinivas Kandagatla <***@linaro.org>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/nvmem/imx-ocotp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
index ac27b9bac3b9..8e7b120696fa 100644
--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -71,7 +71,7 @@ static struct nvmem_config imx_ocotp_nvmem_config = {

static const struct of_device_id imx_ocotp_dt_ids[] = {
{ .compatible = "fsl,imx6q-ocotp", (void *)128 },
- { .compatible = "fsl,imx6sl-ocotp", (void *)32 },
+ { .compatible = "fsl,imx6sl-ocotp", (void *)64 },
{ .compatible = "fsl,imx6sx-ocotp", (void *)128 },
{ },
};

[Levin, Alexander (Sasha Levin)]

From: Zheng Li <***@ericsson.com>

[ Upstream commit e4c5e13aa45c23692e4acf56f0b3533f328199b2 ]

There is an inconsistent conditional judgement between __ip6_append_data
and ip6_finish_output functions, the variable length in __ip6_append_data
just include the length of application's payload and udp6 header, don't
include the length of ipv6 header, but in ip6_finish_output use
(skb->len > ip6_skb_dst_mtu(skb)) as judgement, and skb->len include the
length of ipv6 header.

That causes some particular application's udp6 payloads whose length are
between (MTU - IPv6 Header) and MTU were fragmented by ip6_fragment even
though the rst->dev support UFO feature.

Add the length of ipv6 header to length in __ip6_append_data to keep
consistent conditional judgement as ip6_finish_output for ip6 fragment.

Signed-off-by: Zheng Li <***@ericsson.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Sasha Levin <***@verizon.com>
---
net/ipv6/ip6_output.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index fd649599620e..5a4b8e7bcedd 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1376,7 +1376,7 @@ static int __ip6_append_data(struct sock *sk,
*/

cork->length += length;
- if (((length > mtu) ||
+ if ((((length + fragheaderlen) > mtu) ||
(skb && skb_is_gso(skb))) &&
(sk->sk_protocol == IPPROTO_UDP) &&
(rt->dst.dev->features & NETIF_F_UFO) && !rt->dst.header_len &&

[Levin, Alexander (Sasha Levin)]

From: "Eric W. Biederman" <***@xmission.com>

[ Upstream commit 75422726b0f717d67db3283c2eb5bc14fa2619c5 ]

Add MS_KERNMOUNT to the flags that are passed.
Use sget_userns and force &init_user_ns instead of calling sget so that
even if called from a weird context the internal filesystem will be
considered to be in the intial user namespace.

Luis Ressel reported that the the failure to pass MS_KERNMOUNT into
mount_pseudo broke his in development graphics driver that uses the
generic drm infrastructure. I am not certain the deriver was bug
free in it's usage of that infrastructure but since
mount_pseudo_xattr can never be triggered by userspace it is clearer
and less error prone, and less problematic for the code to be explicit.

Reported-by: Luis Ressel <***@aixah.de>
Tested-by: Luis Ressel <***@aixah.de>
Acked-by: Al Viro <***@ZenIV.linux.org.uk>
Signed-off-by: "Eric W. Biederman" <***@xmission.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
fs/libfs.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/libfs.c b/fs/libfs.c
index 48826d4da189..9588780ad43e 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -245,7 +245,8 @@ struct dentry *mount_pseudo_xattr(struct file_system_type *fs_type, char *name,
struct inode *root;
struct qstr d_name = QSTR_INIT(name, strlen(name));

- s = sget(fs_type, NULL, set_anon_super, MS_NOUSER, NULL);
+ s = sget_userns(fs_type, NULL, set_anon_super, MS_KERNMOUNT|MS_NOUSER,
+ &init_user_ns, NULL);
if (IS_ERR(s))
return ERR_CAST(s);

[Eric W. Biederman]

*Scratches my head*

Is there code in v4.9 where this matters? At the time I merged this to
my knowledge there were no in kernel users that cared. Which is why I
did not cc stable in the first place.

Eric

Post by Levin, Alexander (Sasha Levin)
[ Upstream commit 75422726b0f717d67db3283c2eb5bc14fa2619c5 ]
Add MS_KERNMOUNT to the flags that are passed.
Use sget_userns and force &init_user_ns instead of calling sget so that
even if called from a weird context the internal filesystem will be
considered to be in the intial user namespace.
Luis Ressel reported that the the failure to pass MS_KERNMOUNT into
mount_pseudo broke his in development graphics driver that uses the
generic drm infrastructure. I am not certain the deriver was bug
free in it's usage of that infrastructure but since
mount_pseudo_xattr can never be triggered by userspace it is clearer
and less error prone, and less problematic for the code to be explicit.
---
fs/libfs.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/libfs.c b/fs/libfs.c
index 48826d4da189..9588780ad43e 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -245,7 +245,8 @@ struct dentry *mount_pseudo_xattr(struct file_system_type *fs_type, char *name,
struct inode *root;
struct qstr d_name = QSTR_INIT(name, strlen(name));
- s = sget(fs_type, NULL, set_anon_super, MS_NOUSER, NULL);
+ s = sget_userns(fs_type, NULL, set_anon_super, MS_KERNMOUNT|MS_NOUSER,
+ &init_user_ns, NULL);
if (IS_ERR(s))
return ERR_CAST(s);

[Levin, Alexander (Sasha Levin)]

Post by Eric W. Biederman
*Scratches my head*
Is there code in v4.9 where this matters? At the time I merged this to
my knowledge there were no in kernel users that cared. Which is why I
did not cc stable in the first place.

Hey Eric,

We're trying to go over older commits and figure out if they should have been in -stable even though they're not marked for stable.

Because of cases like these, they get to be reviewed a bunch more to verify that indeed should go into -stable, which is why you got this mail.

I'll drop this patch from the queue.

Post by Eric W. Biederman
Eric

Post by Levin, Alexander (Sasha Levin)
[ Upstream commit 75422726b0f717d67db3283c2eb5bc14fa2619c5 ]
Add MS_KERNMOUNT to the flags that are passed.
Use sget_userns and force &init_user_ns instead of calling sget so that
even if called from a weird context the internal filesystem will be
considered to be in the intial user namespace.
Luis Ressel reported that the the failure to pass MS_KERNMOUNT into
mount_pseudo broke his in development graphics driver that uses the
generic drm infrastructure. I am not certain the deriver was bug
free in it's usage of that infrastructure but since
mount_pseudo_xattr can never be triggered by userspace it is clearer
and less error prone, and less problematic for the code to be explicit.
---
fs/libfs.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/libfs.c b/fs/libfs.c
index 48826d4da189..9588780ad43e 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -245,7 +245,8 @@ struct dentry *mount_pseudo_xattr(struct file_system_type *fs_type, char *name,
struct inode *root;
struct qstr d_name = QSTR_INIT(name, strlen(name));
- s = sget(fs_type, NULL, set_anon_super, MS_NOUSER, NULL);
+ s = sget_userns(fs_type, NULL, set_anon_super, MS_KERNMOUNT|MS_NOUSER,
+ &init_user_ns, NULL);
if (IS_ERR(s))
return ERR_CAST(s);

[Levin, Alexander (Sasha Levin)]

From: Emmanuel Vadot <***@bidouilliste.com>

[ Upstream commit 3116d37651d77125bf50f81f859b1278e02ccce6 ]

The node name for the power seq pin is ***@0 like the mmc2_pins_a one.
This makes the original node (mmc2_pins_a) scrapped out of the dtb and
result in a unusable eMMC if U-Boot didn't configured the pins to the
correct functions.

Signed-off-by: Emmanuel Vadot <***@bidouilliste.com>
Signed-off-by: Maxime Ripard <***@free-electrons.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
index 5ea4915f6d75..10d307408f23 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
@@ -56,7 +56,7 @@
};

&pio {
- mmc2_pins_nrst: ***@0 {
+ mmc2_pins_nrst: mmc2-rst-pin {
allwinner,pins = "PC16";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;

[Levin, Alexander (Sasha Levin)]

From: Sergei Shtylyov <***@cogentembedded.com>

[ Upstream commit 71eae1ca77fd6be218d8a952d97bba827e56516d ]

The RX descriptor word 0 on SH7734 has the RFS[9:0] field in bits 16-25
(bits 0-15 usually used for that are occupied by the packet checksum).
Thus we need to set the 'shift_rd0' field in the SH7734 SoC data...

Fixes: f0e81fecd4f8 ("net: sh_eth: Add support SH7734")
Signed-off-by: Sergei Shtylyov <***@cogentembedded.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/net/ethernet/renesas/sh_eth.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index a2d218b28c0e..12be259394c6 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -819,6 +819,7 @@ static struct sh_eth_cpu_data sh7734_data = {
.tsu = 1,
.hw_crc = 1,
.select_mii = 1,
+ .shift_rd0 = 1,
};

/* SH7763 */

[Levin, Alexander (Sasha Levin)]

From: Jiri Kosina <***@suse.cz>

[ Upstream commit 08f9572671c8047e7234cbf150869aa3c3d59a97 ]

This headlamp contains a dummy HID descriptor which pretends to be
a mouse-like device, but can't be used as a mouse at all.

Reported-by: Lukas Ocilka <***@suse.com>
Signed-off-by: Jiri Kosina <***@suse.cz>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/hid/hid-core.c | 1 +
drivers/hid/hid-ids.h | 3 +++
2 files changed, 4 insertions(+)

diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index a5dd7e63ada3..4f3f5749b0c1 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -2484,6 +2484,7 @@ static const struct hid_device_id hid_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0002) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_PETZL, USB_DEVICE_ID_PETZL_HEADLAMP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS, USB_DEVICE_ID_PHILIPS_IEEE802154_DONGLE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) },
#if IS_ENABLED(CONFIG_MOUSE_SYNAPTICS_USB)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index cfca43f635a6..08fd3f831d62 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -819,6 +819,9 @@
#define USB_VENDOR_ID_PETALYNX 0x18b1
#define USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE 0x0037

+#define USB_VENDOR_ID_PETZL 0x2122
+#define USB_DEVICE_ID_PETZL_HEADLAMP 0x1234
+
#define USB_VENDOR_ID_PHILIPS 0x0471
#define USB_DEVICE_ID_PHILIPS_IEEE802154_DONGLE 0x0617

[Levin, Alexander (Sasha Levin)]

From: Phil Reid <***@electromag.com.au>

[ Upstream commit 13288bdf4adbaa6bd1267f10044c1bc25d90ce7f ]

Some system have multiple dw devices. Currently the driver uses a
fixed name for the debugfs dir. Append dev name to the debugfs dir
name to make it unique.

Signed-off-by: Phil Reid <***@electromag.com.au>
Signed-off-by: Mark Brown <***@kernel.org>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/spi/spi-dw.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 27960e46135d..c4226c07e091 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -107,7 +107,10 @@ static const struct file_operations dw_spi_regs_ops = {

static int dw_spi_debugfs_init(struct dw_spi *dws)
{
- dws->debugfs = debugfs_create_dir("dw_spi", NULL);
+ char name[128];
+
+ snprintf(name, 128, "dw_spi-%s", dev_name(&dws->master->dev));
+ dws->debugfs = debugfs_create_dir(name, NULL);
if (!dws->debugfs)
return -ENOMEM;

[Levin, Alexander (Sasha Levin)]

From: Nicholas Mc Guire <***@osadl.org>

[ Upstream commit fac69d0efad08fc15e4dbfc116830782acc0dc9a ]

Add the missing declarations of basic string functions to string.h to allow
a clean build.

Fixes: 5be865661516 ("String-handling functions for the new x86 setup code.")
Signed-off-by: Nicholas Mc Guire <***@osadl.org>
Link: http://lkml.kernel.org/r/1483781911-21399-1-git-send-email-***@osadl.org
Signed-off-by: Thomas Gleixner <***@linutronix.de>
Signed-off-by: Sasha Levin <***@verizon.com>
---
arch/x86/boot/string.c | 1 +
arch/x86/boot/string.h | 9 +++++++++
2 files changed, 10 insertions(+)

diff --git a/arch/x86/boot/string.c b/arch/x86/boot/string.c
index cc3bd583dce1..9e240fcba784 100644
--- a/arch/x86/boot/string.c
+++ b/arch/x86/boot/string.c
@@ -14,6 +14,7 @@

#include <linux/types.h>
#include "ctype.h"
+#include "string.h"

int memcmp(const void *s1, const void *s2, size_t len)
{
diff --git a/arch/x86/boot/string.h b/arch/x86/boot/string.h
index 725e820602b1..113588ddb43f 100644
--- a/arch/x86/boot/string.h
+++ b/arch/x86/boot/string.h
@@ -18,4 +18,13 @@ int memcmp(const void *s1, const void *s2, size_t len);
#define memset(d,c,l) __builtin_memset(d,c,l)
#define memcmp __builtin_memcmp

+extern int strcmp(const char *str1, const char *str2);
+extern int strncmp(const char *cs, const char *ct, size_t count);
+extern size_t strlen(const char *s);
+extern char *strstr(const char *s1, const char *s2);
+extern size_t strnlen(const char *s, size_t maxlen);
+extern unsigned int atou(const char *s);
+extern unsigned long long simple_strtoull(const char *cp, char **endp,
+ unsigned int base);
+
#endif /* BOOT_STRING_H */

[Levin, Alexander (Sasha Levin)]

From: Jiandi An <***@codeaurora.org>

[ Upstream commit 0b47a6bd1150f4846b1d61925a4cc5a96593a541 ]

Ensure all reserved fields of xatp are zero before making
hypervisor call to XEN in xen_map_device_mmio().
xenmem_add_to_physmap_one() in XEN fails the mapping request if
extra.res reserved field in xatp is not zero for XENMAPSPACE_dev_mmio
request.

Signed-off-by: Jiandi An <***@codeaurora.org>
Reviewed-by: Stefano Stabellini <***@kernel.org>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/xen/arm-device.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/xen/arm-device.c b/drivers/xen/arm-device.c
index 778acf80aacb..85dd20e05726 100644
--- a/drivers/xen/arm-device.c
+++ b/drivers/xen/arm-device.c
@@ -58,9 +58,13 @@ static int xen_map_device_mmio(const struct resource *resources,
xen_pfn_t *gpfns;
xen_ulong_t *idxs;
int *errs;
- struct xen_add_to_physmap_range xatp;

for (i = 0; i < count; i++) {
+ struct xen_add_to_physmap_range xatp = {
+ .domid = DOMID_SELF,
+ .space = XENMAPSPACE_dev_mmio
+ };
+
r = &resources[i];
nr = DIV_ROUND_UP(resource_size(r), XEN_PAGE_SIZE);
if ((resource_type(r) != IORESOURCE_MEM) || (nr == 0))
@@ -87,9 +91,7 @@ static int xen_map_device_mmio(const struct resource *resources,
idxs[j] = XEN_PFN_DOWN(r->start) + j;
}

- xatp.domid = DOMID_SELF;
xatp.size = nr;
- xatp.space = XENMAPSPACE_dev_mmio;

set_xen_guest_handle(xatp.gpfns, gpfns);
set_xen_guest_handle(xatp.idxs, idxs);

[Levin, Alexander (Sasha Levin)]

From: Andy Shevchenko <***@linux.intel.com>

[ Upstream commit 159d3726db12b3476bc59ea0ab0a702103d466b5 ]

The current implementation supports only Intel Merrifield platforms. Don't mess
with the rest of the Intel MID family by not registering device with wrong
properties.

Signed-off-by: Andy Shevchenko <***@linux.intel.com>
Cc: Linus Torvalds <***@linux-foundation.org>
Cc: Peter Zijlstra <***@infradead.org>
Cc: Thomas Gleixner <***@linutronix.de>
Link: http://lkml.kernel.org/r/20170102092450.87229-1-***@linux.intel.com
Signed-off-by: Ingo Molnar <***@kernel.org>
Signed-off-by: Sasha Levin <***@verizon.com>
---
arch/x86/platform/intel-mid/device_libs/Makefile | 2 +-
.../device_libs/{platform_spidev.c => platform_mrfld_spidev.c} | 4 ++++
2 files changed, 5 insertions(+), 1 deletion(-)
rename arch/x86/platform/intel-mid/device_libs/{platform_spidev.c => platform_mrfld_spidev.c} (91%)

diff --git a/arch/x86/platform/intel-mid/device_libs/Makefile b/arch/x86/platform/intel-mid/device_libs/Makefile
index dd6cfa4ad3ac..75029d0cfa15 100644
--- a/arch/x86/platform/intel-mid/device_libs/Makefile
+++ b/arch/x86/platform/intel-mid/device_libs/Makefile
@@ -15,7 +15,7 @@ obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_msic_power_btn.o
obj-$(subst m,y,$(CONFIG_GPIO_INTEL_PMIC)) += platform_pmic_gpio.o
obj-$(subst m,y,$(CONFIG_INTEL_MFLD_THERMAL)) += platform_msic_thermal.o
# SPI Devices
-obj-$(subst m,y,$(CONFIG_SPI_SPIDEV)) += platform_spidev.o
+obj-$(subst m,y,$(CONFIG_SPI_SPIDEV)) += platform_mrfld_spidev.o
# I2C Devices
obj-$(subst m,y,$(CONFIG_SENSORS_EMC1403)) += platform_emc1403.o
obj-$(subst m,y,$(CONFIG_SENSORS_LIS3LV02D)) += platform_lis331.o
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_spidev.c b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_spidev.c
similarity index 91%
rename from arch/x86/platform/intel-mid/device_libs/platform_spidev.c
rename to arch/x86/platform/intel-mid/device_libs/platform_mrfld_spidev.c
index 30c601b399ee..27186ad654c9 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_spidev.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_spidev.c
@@ -11,6 +11,7 @@
* of the License.
*/

+#include <linux/err.h>
#include <linux/init.h>
#include <linux/sfi.h>
#include <linux/spi/pxa2xx_spi.h>
@@ -34,6 +35,9 @@ static void __init *spidev_platform_data(void *info)
{
struct spi_board_info *spi_info = info;

+ if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER)
+ return ERR_PTR(-ENODEV);
+
spi_info->mode = SPI_MODE_0;
spi_info->controller_data = &spidev_spi_chip;

[Levin, Alexander (Sasha Levin)]

From: Michal Kubeček <***@suse.cz>

[ Upstream commit a5cb659bbc1c8644efa0c3138a757a1e432a4880 ]

Our customer encountered stuck NFS writes for blocks starting at specific
offsets w.r.t. page boundary caused by networking stack sending packets via
UFO enabled device with wrong checksum. The problem can be reproduced by
composing a long UDP datagram from multiple parts using MSG_MORE flag:

sendto(sd, buff, 1000, MSG_MORE, ...);
sendto(sd, buff, 1000, MSG_MORE, ...);
sendto(sd, buff, 3000, 0, ...);

Assume this packet is to be routed via a device with MTU 1500 and
NETIF_F_UFO enabled. When second sendto() gets into __ip_append_data(),
this condition is tested (among others) to decide whether to call
ip_ufo_append_data():

((length + fragheaderlen) > mtu) || (skb && skb_is_gso(skb))

At the moment, we already have skb with 1028 bytes of data which is not
marked for GSO so that the test is false (fragheaderlen is usually 20).
Thus we append second 1000 bytes to this skb without invoking UFO. Third
sendto(), however, has sufficient length to trigger the UFO path so that we
end up with non-UFO skb followed by a UFO one. Later on, udp_send_skb()
uses udp_csum() to calculate the checksum but that assumes all fragments
have correct checksum in skb->csum which is not true for UFO fragments.

When checking against MTU, we need to add skb->len to length of new segment
if we already have a partially filled skb and fragheaderlen only if there
isn't one.

In the IPv6 case, skb can only be null if this is the first segment so that
we have to use headersize (length of the first IPv6 header) rather than
fragheaderlen (length of IPv6 header of further fragments) for skb == NULL.

Fixes: e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach")
Fixes: e4c5e13aa45c ("ipv6: Should use consistent conditional judgement for
ip6 fragment between __ip6_append_data and ip6_finish_output")
Signed-off-by: Michal Kubecek <***@suse.cz>
Acked-by: Vlad Yasevich <***@redhat.com>
Signed-off-by: David S. Miller <***@davemloft.net>
[SL: Drop changes to net/ipv4/ip_output.c because 4.9 doesn't have
e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach")]
Signed-off-by: Sasha Levin <***@verizon.com>
---
net/ipv6/ip6_output.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 5a4b8e7bcedd..9213eba601d0 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1376,7 +1376,7 @@ static int __ip6_append_data(struct sock *sk,
*/

cork->length += length;
- if ((((length + fragheaderlen) > mtu) ||
+ if ((((length + (skb ? skb->len : headersize)) > mtu) ||
(skb && skb_is_gso(skb))) &&
(sk->sk_protocol == IPPROTO_UDP) &&
(rt->dst.dev->features

[Michal Kubecek]

Post by Levin, Alexander (Sasha Levin)
[ Upstream commit a5cb659bbc1c8644efa0c3138a757a1e432a4880 ]
Our customer encountered stuck NFS writes for blocks starting at specific
offsets w.r.t. page boundary caused by networking stack sending packets via
UFO enabled device with wrong checksum. The problem can be reproduced by
sendto(sd, buff, 1000, MSG_MORE, ...);
sendto(sd, buff, 1000, MSG_MORE, ...);
sendto(sd, buff, 3000, 0, ...);
Assume this packet is to be routed via a device with MTU 1500 and
NETIF_F_UFO enabled. When second sendto() gets into __ip_append_data(),
this condition is tested (among others) to decide whether to call
((length + fragheaderlen) > mtu) || (skb && skb_is_gso(skb))
At the moment, we already have skb with 1028 bytes of data which is not
marked for GSO so that the test is false (fragheaderlen is usually 20).
Thus we append second 1000 bytes to this skb without invoking UFO. Third
sendto(), however, has sufficient length to trigger the UFO path so that we
end up with non-UFO skb followed by a UFO one. Later on, udp_send_skb()
uses udp_csum() to calculate the checksum but that assumes all fragments
have correct checksum in skb->csum which is not true for UFO fragments.
When checking against MTU, we need to add skb->len to length of new segment
if we already have a partially filled skb and fragheaderlen only if there
isn't one.
In the IPv6 case, skb can only be null if this is the first segment so that
we have to use headersize (length of the first IPv6 header) rather than
fragheaderlen (length of IPv6 header of further fragments) for skb == NULL.
Fixes: e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach")
Fixes: e4c5e13aa45c ("ipv6: Should use consistent conditional judgement for
ip6 fragment between __ip6_append_data and ip6_finish_output")
[SL: Drop changes to net/ipv4/ip_output.c because 4.9 doesn't have
e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach")]

Commit e89e9cf539a2 is in mainline since v2.6.16.28 so that 4.9 does
have it. The conflict on cherry-pick is caused by missing commit
e4c5e13aa45c but that is the same as in the IPv6 part. I'm adding the
IPv4 part backported to 4.9 below

Post by Levin, Alexander (Sasha Levin)
---
net/ipv6/ip6_output.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 5a4b8e7bcedd..9213eba601d0 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1376,7 +1376,7 @@ static int __ip6_append_data(struct sock *sk,
*/
cork->length += length;
- if ((((length + fragheaderlen) > mtu) ||
+ if ((((length + (skb ? skb->len : headersize)) > mtu) ||
(skb && skb_is_gso(skb))) &&
(sk->sk_protocol == IPPROTO_UDP) &&
(rt->dst.dev->features & NETIF_F_UFO) && !rt->dst.header_len &&
--
2.11.0

This is strange, it looks as if e4c5e13aa45c was already applied before
but I can't see that in stable-4.9.y branch.


diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index e5c1dbef3626..06215ba88b93 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -936,7 +936,8 @@ static int __ip_append_data(struct sock *sk,
csummode = CHECKSUM_PARTIAL;

cork->length += length;
- if (((length > mtu) || (skb && skb_is_gso(skb))) &&
+ if ((((length + (skb ? skb->len : fragheaderlen)) > mtu) ||
+ (skb && skb_is_gso(skb))) &&
(sk->sk_protocol == IPPROTO_UDP) &&
(rt->dst.dev->features & NETIF_F_UFO) && !rt->dst.header_len &&
(sk->sk_type == SOCK_DGRAM) && !sk->sk_no_check_tx) {
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index fd649599620e..9213eba601d0 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1376,7 +1376,7 @@ static int __ip6_append_data(struct sock *sk,
*/

cork->length += length;
- if (((length > mtu) ||
+ if ((((length + (skb ? skb->len : headersize)) > mtu) ||
(skb && skb_is_gso(skb))) &&
(sk->sk_protocol == IPPROTO_UDP) &&
(rt->dst.dev->features & NETIF_F_UFO) && !rt->dst.header_len &&

[Levin, Alexander (Sasha Levin)]

Post by Michal Kubecek

Post by Levin, Alexander (Sasha Levin)
[ Upstream commit a5cb659bbc1c8644efa0c3138a757a1e432a4880 ]
Our customer encountered stuck NFS writes for blocks starting at specific
offsets w.r.t. page boundary caused by networking stack sending packets via
UFO enabled device with wrong checksum. The problem can be reproduced by
sendto(sd, buff, 1000, MSG_MORE, ...);
sendto(sd, buff, 1000, MSG_MORE, ...);
sendto(sd, buff, 3000, 0, ...);
Assume this packet is to be routed via a device with MTU 1500 and
NETIF_F_UFO enabled. When second sendto() gets into __ip_append_data(),
this condition is tested (among others) to decide whether to call
((length + fragheaderlen) > mtu) || (skb && skb_is_gso(skb))
At the moment, we already have skb with 1028 bytes of data which is not
marked for GSO so that the test is false (fragheaderlen is usually 20).
Thus we append second 1000 bytes to this skb without invoking UFO. Third
sendto(), however, has sufficient length to trigger the UFO path so that we
end up with non-UFO skb followed by a UFO one. Later on, udp_send_skb()
uses udp_csum() to calculate the checksum but that assumes all fragments
have correct checksum in skb->csum which is not true for UFO fragments.
When checking against MTU, we need to add skb->len to length of new segment
if we already have a partially filled skb and fragheaderlen only if there
isn't one.
In the IPv6 case, skb can only be null if this is the first segment so that
we have to use headersize (length of the first IPv6 header) rather than
fragheaderlen (length of IPv6 header of further fragments) for skb == NULL.
Fixes: e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach")
Fixes: e4c5e13aa45c ("ipv6: Should use consistent conditional judgement for
ip6 fragment between __ip6_append_data and ip6_finish_output")
[SL: Drop changes to net/ipv4/ip_output.c because 4.9 doesn't have
e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach")]

Commit e89e9cf539a2 is in mainline since v2.6.16.28 so that 4.9 does
have it. The conflict on cherry-pick is caused by missing commit
e4c5e13aa45c but that is the same as in the IPv6 part. I'm adding the
IPv4 part backported to 4.9 below

Post by Levin, Alexander (Sasha Levin)
---
net/ipv6/ip6_output.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 5a4b8e7bcedd..9213eba601d0 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1376,7 +1376,7 @@ static int __ip6_append_data(struct sock *sk,
*/
cork->length += length;
- if ((((length + fragheaderlen) > mtu) ||
+ if ((((length + (skb ? skb->len : headersize)) > mtu) ||
(skb && skb_is_gso(skb))) &&
(sk->sk_protocol == IPPROTO_UDP) &&
(rt->dst.dev->features & NETIF_F_UFO) && !rt->dst.header_len &&
--
2.11.0

This is strange, it looks as if e4c5e13aa45c was already applied before
but I can't see that in stable-4.9.y branch.

It was added in this patchset.

Post by Michal Kubecek
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index e5c1dbef3626..06215ba88b93 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -936,7 +936,8 @@ static int __ip_append_data(struct sock *sk,
csummode = CHECKSUM_PARTIAL;
cork->length += length;
- if (((length > mtu) || (skb && skb_is_gso(skb))) &&
+ if ((((length + (skb ? skb->len : fragheaderlen)) > mtu) ||
+ (skb && skb_is_gso(skb))) &&
(sk->sk_protocol == IPPROTO_UDP) &&
(rt->dst.dev->features & NETIF_F_UFO) && !rt->dst.header_len &&
(sk->sk_type == SOCK_DGRAM) && !sk->sk_no_check_tx) {
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index fd649599620e..9213eba601d0 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1376,7 +1376,7 @@ static int __ip6_append_data(struct sock *sk,
*/
cork->length += length;
- if (((length > mtu) ||
+ if ((((length + (skb ? skb->len : headersize)) > mtu) ||
(skb && skb_is_gso(skb))) &&
(sk->sk_protocol == IPPROTO_UDP) &&
(rt->dst.dev->features & NETIF_F_UFO) && !rt->dst.header_len &&

Th

[Levin, Alexander (Sasha Levin)]

From: Marek Szyprowski <***@samsung.com>

[ Upstream commit 318fa46cc60d37fec1e87dbf03a82aca0f5ce695 ]

Some parent clocks of the Exynos542x clock blocks, which have separate
power domains (like DISP, MFC, MSC, GSC, FSYS and G2D) must be always
enabled to access any register related to power management unit or devices
connected to it. For the time being, until a proper solution based on
runtime PM is applied, mark those clocks as critical (instead of ignore
unused or even no flags) to prevent disabling them.

Signed-off-by: Marek Szyprowski <***@samsung.com>
Acked-by: Sylwester Nawrocki <***@samsung.com>
Reviewed-by: Chanwoo Choi <***@samsung.com>
Reviewed-by: Javier Martinez Canillas <***@osg.samsung.com>
Tested-by: Javier Martinez Canillas <***@osg.samsung.com> [Exynos5800 Peach Pi Chromebook]
Signed-off-by: Stephen Boyd <***@codeaurora.org>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/clk/samsung/clk-exynos5420.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 8c8b495cbf0d..cdc092a1d9ef 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -586,7 +586,7 @@ static const struct samsung_gate_clock exynos5800_gate_clks[] __initconst = {
GATE(CLK_ACLK550_CAM, "aclk550_cam", "mout_user_aclk550_cam",
GATE_BUS_TOP, 24, 0, 0),
GATE(CLK_ACLK432_SCALER, "aclk432_scaler", "mout_user_aclk432_scaler",
- GATE_BUS_TOP, 27, 0, 0),
+ GATE_BUS_TOP, 27, CLK_IS_CRITICAL, 0),
};

static const struct samsung_mux_clock exynos5420_mux_clks[] __initconst = {
@@ -956,20 +956,20 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = {
GATE(CLK_SMMU_G2D, "smmu_g2d", "aclk333_g2d", GATE_IP_G2D, 7, 0, 0),

GATE(0, "aclk200_fsys", "mout_user_aclk200_fsys",
- GATE_BUS_FSYS0, 9, CLK_IGNORE_UNUSED, 0),
+ GATE_BUS_FSYS0, 9, CLK_IS_CRITICAL, 0),
GATE(0, "aclk200_fsys2", "mout_user_aclk200_fsys2",
GATE_BUS_FSYS0, 10, CLK_IGNORE_UNUSED, 0),

GATE(0, "aclk333_g2d", "mout_user_aclk333_g2d",
GATE_BUS_TOP, 0, CLK_IGNORE_UNUSED, 0),
GATE(0, "aclk266_g2d", "mout_user_aclk266_g2d",
- GATE_BUS_TOP, 1, CLK_IGNORE_UNUSED, 0),
+ GATE_BUS_TOP, 1, CLK_IS_CRITICAL, 0),
GATE(0, "aclk300_jpeg", "mout_user_aclk300_jpeg",
GATE_BUS_TOP, 4, CLK_IGNORE_UNUSED, 0),
GATE(0, "aclk333_432_isp0", "mout_user_aclk333_432_isp0",
GATE_BUS_TOP, 5, 0, 0),
GATE(0, "aclk300_gscl", "mout_user_aclk300_gscl",
- GATE_BUS_TOP, 6, CLK_IGNORE_UNUSED, 0),
+ GATE_BUS_TOP, 6, CLK_IS_CRITICAL, 0),
GATE(0, "aclk333_432_gscl", "mout_user_aclk333_432_gscl",
GATE_BUS_TOP, 7, CLK_IGNORE_UNUSED, 0),
GATE(0, "aclk333_432_isp", "mout_user_aclk333_432_isp",
@@ -983,20 +983,20 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = {
GATE(0, "aclk166", "mout_user_aclk166",
GATE_BUS_TOP, 14, CLK_IGNORE_UNUSED, 0),
GATE(CLK_ACLK333, "aclk333", "mout_user_aclk333",
- GATE_BUS_TOP, 15, CLK_IGNORE_UNUSED, 0),
+ GATE_BUS_TOP, 15, CLK_IS_CRITICAL, 0),
GATE(0, "aclk400_isp", "mout_user_aclk400_isp",
GATE_BUS_TOP, 16, 0, 0),
GATE(0, "aclk400_mscl", "mout_user_aclk400_mscl",
GATE_BUS_TOP, 17, 0, 0),
GATE(0, "aclk200_disp1", "mout_user_aclk200_disp1",
- GATE_BUS_TOP, 18, 0, 0),
+ GATE_BUS_TOP, 18, CLK_IS_CRITICAL, 0),
GATE(CLK_SCLK_MPHY_IXTAL24, "sclk_mphy_ixtal24", "mphy_refclk_ixtal24",
GATE_BUS_TOP, 28, 0, 0),
GATE(CLK_SCLK_HSIC_12M, "sclk_hsic_12m", "ff_hsic_12m",
GATE_BUS_TOP, 29, 0, 0),

GATE(0, "aclk300_disp1", "mout_user_aclk300_disp1",
- SRC_MASK_TOP2, 24, 0, 0),
+ SRC_MASK_TOP2, 24, CLK_IS_CRITICAL, 0),

GATE(CLK_MAU_EPLL, "mau_epll", "mout_mau_epll_clk",
SRC_MASK_TOP7, 20, 0, 0),

[Levin, Alexander (Sasha Levin)]

From: Liu Bo <***@oracle.com>

[ Upstream commit c2931667c83ded6504b3857e99cc45b21fa496fb ]

Currently how btrfs dio deals with split dio write is not good
enough if dio write is split into several segments due to the
lack of contiguous space, a large dio write like 'dd bs=1G count=1'
can end up with incorrect outstanding_extents counter and endio
would complain loudly with an assertion.

This fixes the problem by compensating the outstanding_extents
counter in inode if a large dio write gets split.

Reported-by: Anand Jain <***@oracle.com>
Tested-by: Anand Jain <***@oracle.com>
Signed-off-by: Liu Bo <***@oracle.com>
Signed-off-by: David Sterba <***@suse.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
fs/btrfs/inode.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index a2a014b19f18..8a05fa7e2152 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -7648,11 +7648,18 @@ static void adjust_dio_outstanding_extents(struct inode *inode,
* within our reservation, otherwise we need to adjust our inode
* counter appropriately.
*/
- if (dio_data->outstanding_extents) {
+ if (dio_data->outstanding_extents >= num_extents) {
dio_data->outstanding_extents -= num_extents;
} else {
+ /*
+ * If dio write length has been split due to no large enough
+ * contiguous space, we need to compensate our inode counter
+ * appropriately.
+ */
+ u64 num_needed = num_extents - dio_data->outstanding_extents;
+
spin_lock(&BTRFS_I(inode)->lock);
- BTRFS_I(inode)->outstanding_extents += num_extents;
+ BTRFS_I(inode)->outstanding_extents += num_needed;
spin_unlock(&BTRFS_I(inode)->lock);
}
}

[Levin, Alexander (Sasha Levin)]

From: Arnaldo Carvalho de Melo <***@redhat.com>

[ Upstream commit 30a9c6444810429aa2b7cbfbd453ce339baaadbf ]

Those are binaries as well, so should be installed by:

make -C tools/perf install-bin'

too.

Cc: Alexander Shishkin <***@linux.intel.com>
Cc: Daniel Bristot de Oliveira <***@redhat.com>
Cc: Jiri Olsa <***@kernel.org>
Cc: Peter Zijlstra <***@infradead.org>
Cc: Steven Rostedt <***@goodmis.org>
Link: http://lkml.kernel.org/n/tip-***@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <***@redhat.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
tools/perf/Makefile.perf | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
index 982d6439bb07..ef52d1e3d431 100644
--- a/tools/perf/Makefile.perf
+++ b/tools/perf/Makefile.perf
@@ -729,9 +729,9 @@ install-tests: all install-gtk
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/attr'; \
$(INSTALL) tests/attr/* '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/attr'

-install-bin: install-tools install-tests
+install-bin: install-tools install-tests install-traceevent-plugins

-install: install-bin try-install-man install-traceevent-plugins
+install: install-bin try-install-man

install-python_ext:
$(PYTHON_WORD) util/setup.py --quiet install --root='/$(DESTDIR_SQ)'

[Levin, Alexander (Sasha Levin)]

From: Burak Ok <burak-***@bur0k.de>

[ Upstream commit 0371adcdaca92912baaa3256ed13e058a016e62d ]

If a call to mempool_create_slab_pool() in snic_probe() returns NULL,
return -ENOMEM to indicate failure. mempool_creat_slab_pool() only fails
if it cannot allocate memory.

https://bugzilla.kernel.org/show_bug.cgi?id=189061

Reported-by: ***@ruc.edu.cn
Signed-off-by: Burak Ok <burak-***@bur0k.de>
Signed-off-by: Andreas Schaertl <***@fau.de>
Acked-by: Narsimhulu Musini <***@cisco.com>
Reviewed-by: Ewan D. Milne <***@redhat.com>
Signed-off-by: Martin K. Petersen <***@oracle.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/scsi/snic/snic_main.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/scsi/snic/snic_main.c b/drivers/scsi/snic/snic_main.c
index 396b32dca074..7cf70aaec0ba 100644
--- a/drivers/scsi/snic/snic_main.c
+++ b/drivers/scsi/snic/snic_main.c
@@ -591,6 +591,7 @@ snic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (!pool) {
SNIC_HOST_ERR(shost, "dflt sgl pool creation failed\n");

+ ret = -ENOMEM;
goto err_free_res;
}

@@ -601,6 +602,7 @@ snic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (!pool) {
SNIC_HOST_ERR(shost, "max sgl pool creation failed\n");

+ ret = -ENOMEM;
goto err_free_dflt_sgl_pool;
}

@@ -611,6 +613,7 @@ snic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (!pool) {
SNIC_HOST_ERR(shost, "snic tmreq info pool creation failed.\n");

+ ret = -ENOMEM;
goto err_free_max_sgl_pool;
}

[Levin, Alexander (Sasha Levin)]

From: Jack Morgenstein <***@dev.mellanox.co.il>

[ Upstream commit 10b1c04e92229ebeb38ccd0dcf2b6d3ec73c0575 ]

Demoting simple flow steering rule priority (for DPDK) was achieved by
wrapping FW commands MLX4_QP_FLOW_STEERING_ATTACH/DETACH for the PF
as well, and forcing the priority to MLX4_DOMAIN_NIC in the wrapper
function for the PF and all VFs.

In function mlx4_ib_create_flow(), this change caused the main rule
creation for the PF to be wrapped, while it left the associated
tunnel steering rule creation unwrapped for the PF.

This mismatch caused rule deletion failures in mlx4_ib_destroy_flow()
for the PF when the detach wrapper function did not find the associated
tunnel-steering rule (since creation of that rule for the PF did not
go through the wrapper function).

Fix this by setting MLX4_QP_FLOW_STEERING_ATTACH/DETACH to be "native"
(so that the PF invocation does not go through the wrapper), and perform
the required priority demotion for the PF in the mlx4_ib_create_flow()
code path.

Fixes: 48564135cba8 ("net/mlx4_core: Demote simple multicast and broadcast flow steering rules")
Signed-off-by: Jack Morgenstein <***@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <***@mellanox.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/infiniband/hw/mlx4/main.c | 14 ++++++++++++--
drivers/net/ethernet/mellanox/mlx4/main.c | 18 ++++++++++++++++++
.../net/ethernet/mellanox/mlx4/resource_tracker.c | 22 +---------------------
include/linux/mlx4/device.h | 2 ++
4 files changed, 33 insertions(+), 23 deletions(-)

diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index f2a885eee4bb..8059b7eaf3a8 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -1680,9 +1680,19 @@ static int __mlx4_ib_create_flow(struct ib_qp *qp, struct ib_flow_attr *flow_att
size += ret;
}

+ if (mlx4_is_master(mdev->dev) && flow_type == MLX4_FS_REGULAR &&
+ flow_attr->num_of_specs == 1) {
+ struct _rule_hw *rule_header = (struct _rule_hw *)(ctrl + 1);
+ enum ib_flow_spec_type header_spec =
+ ((union ib_flow_spec *)(flow_attr + 1))->type;
+
+ if (header_spec == IB_FLOW_SPEC_ETH)
+ mlx4_handle_eth_header_mcast_prio(ctrl, rule_header);
+ }
+
ret = mlx4_cmd_imm(mdev->dev, mailbox->dma, reg_id, size >> 2, 0,
MLX4_QP_FLOW_STEERING_ATTACH, MLX4_CMD_TIME_CLASS_A,
- MLX4_CMD_WRAPPED);
+ MLX4_CMD_NATIVE);
if (ret == -ENOMEM)
pr_err("mcg table is full. Fail to register network rule.\n");
else if (ret == -ENXIO)
@@ -1699,7 +1709,7 @@ static int __mlx4_ib_destroy_flow(struct mlx4_dev *dev, u64 reg_id)
int err;
err = mlx4_cmd(dev, reg_id, 0, 0,
MLX4_QP_FLOW_STEERING_DETACH, MLX4_CMD_TIME_CLASS_A,
- MLX4_CMD_WRAPPED);
+ MLX4_CMD_NATIVE);
if (err)
pr_err("Fail to detach network rule. registration id = 0x%llx\n",
reg_id);
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index b2ca8a635b2e..551786f58e59 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -42,6 +42,7 @@
#include <linux/io-mapping.h>
#include <linux/delay.h>
#include <linux/kmod.h>
+#include <linux/etherdevice.h>
#include <net/devlink.h>

#include <linux/mlx4/device.h>
@@ -782,6 +783,23 @@ int mlx4_is_slave_active(struct mlx4_dev *dev, int slave)
}
EXPORT_SYMBOL(mlx4_is_slave_active);

+void mlx4_handle_eth_header_mcast_prio(struct mlx4_net_trans_rule_hw_ctrl *ctrl,
+ struct _rule_hw *eth_header)
+{
+ if (is_multicast_ether_addr(eth_header->eth.dst_mac) ||
+ is_broadcast_ether_addr(eth_header->eth.dst_mac)) {
+ struct mlx4_net_trans_rule_hw_eth *eth =
+ (struct mlx4_net_trans_rule_hw_eth *)eth_header;
+ struct _rule_hw *next_rule = (struct _rule_hw *)(eth + 1);
+ bool last_rule = next_rule->size == 0 && next_rule->id == 0 &&
+ next_rule->rsvd == 0;
+
+ if (last_rule)
+ ctrl->prio = cpu_to_be16(MLX4_DOMAIN_NIC);
+ }
+}
+EXPORT_SYMBOL(mlx4_handle_eth_header_mcast_prio);
+
static void slave_adjust_steering_mode(struct mlx4_dev *dev,
struct mlx4_dev_cap *dev_cap,
struct mlx4_init_hca_param *hca_param)
diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index f1eb74a61bce..1822382212ee 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -4165,22 +4165,6 @@ static int validate_eth_header_mac(int slave, struct _rule_hw *eth_header,
return 0;
}

-static void handle_eth_header_mcast_prio(struct mlx4_net_trans_rule_hw_ctrl *ctrl,
- struct _rule_hw *eth_header)
-{
- if (is_multicast_ether_addr(eth_header->eth.dst_mac) ||
- is_broadcast_ether_addr(eth_header->eth.dst_mac)) {
- struct mlx4_net_trans_rule_hw_eth *eth =
- (struct mlx4_net_trans_rule_hw_eth *)eth_header;
- struct _rule_hw *next_rule = (struct _rule_hw *)(eth + 1);
- bool last_rule = next_rule->size == 0 && next_rule->id == 0 &&
- next_rule->rsvd == 0;
-
- if (last_rule)
- ctrl->prio = cpu_to_be16(MLX4_DOMAIN_NIC);
- }
-}
-
/*
* In case of missing eth header, append eth header with a MAC address
* assigned to the VF.
@@ -4364,10 +4348,7 @@ int mlx4_QP_FLOW_STEERING_ATTACH_wrapper(struct mlx4_dev *dev, int slave,
header_id = map_hw_to_sw_id(be16_to_cpu(rule_header->id));

if (header_id == MLX4_NET_TRANS_RULE_ID_ETH)
- handle_eth_header_mcast_prio(ctrl, rule_header);
-
- if (slave == dev->caps.function)
- goto execute;
+ mlx4_handle_eth_header_mcast_prio(ctrl, rule_header);

switch (header_id) {
case MLX4_NET_TRANS_RULE_ID_ETH:
@@ -4395,7 +4376,6 @@ int mlx4_QP_FLOW_STEERING_ATTACH_wrapper(struct mlx4_dev *dev, int slave,
goto err_put_qp;
}

-execute:
err = mlx4_cmd_imm(dev, inbox->dma, &vhcr->out_param,
vhcr->in_modifier, 0,
MLX4_QP_FLOW_STEERING_ATTACH, MLX4_CMD_TIME_CLASS_A,
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index c9f379689dd0..80faf44b8887 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -1384,6 +1384,8 @@ int set_phv_bit(struct mlx4_dev *dev, u8 port, int new_val);
int get_phv_bit(struct mlx4_dev *dev, u8 port, int *phv);
int mlx4_get_is_vlan_offload_disabled(struct mlx4_dev *dev, u8 port,
bool *vlan_offload_disabled);
+void mlx4_handle_eth_header_mcast_prio(struct mlx4_net_trans_rule_hw_ctrl *ctrl,
+ struct _rule_hw *eth_header);
int mlx4_find_cached_mac(struct mlx4_dev *dev, u8 port, u64 mac, int *idx);
int mlx4_find_cached_vlan(struct mlx4_dev *dev, u8 port, u16 vid, int *idx);
int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index);

[Levin, Alexander (Sasha Levin)]

From: Arnaldo Carvalho de Melo <***@redhat.com>

[ Upstream commit 7934c98a6e04028eb34c1293bfb5a6b0ab630b66 ]

Markus reported that perf segfaults when reading /sys/kernel/notes from
a kernel linked with GNU gold, due to what looks like a gold bug, so do
some bounds checking to avoid crashing in that case.

Reported-by: Markus Trippelsdorf <***@trippelsdorf.de>
Report-Link: http://lkml.kernel.org/r/***@x4
Cc: Adrian Hunter <***@intel.com>
Cc: David Ahern <***@gmail.com>
Cc: Jiri Olsa <***@kernel.org>
Cc: Namhyung Kim <***@kernel.org>
Cc: Wang Nan <***@huawei.com>
Link: http://lkml.kernel.org/n/tip-***@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <***@redhat.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
tools/perf/util/symbol-elf.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
index 99400b0e8f2a..adbc6c02c3aa 100644
--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -537,6 +537,12 @@ int sysfs__read_build_id(const char *filename, void *build_id, size_t size)
break;
} else {
int n = namesz + descsz;
+
+ if (n > (int)sizeof(bf)) {
+ n = sizeof(bf);
+ pr_debug("%s: truncating reading of build id in sysfs file %s: n_namesz=%u, n_descsz=%u.\n",
+ __func__, filename, nhdr.n_namesz, nhdr.n_descsz);
+ }
if (read(fd, bf, n) != n)
break;
}

[Levin, Alexander (Sasha Levin)]

From: Jordan Crouse <***@codeaurora.org>

[ Upstream commit 6490abc4bc35fa4f3bdb9c7e49096943c50e29ea ]

The error cases in submit_reloc() need to put back the virtual
address of the bo before failling. Add a single failure path
for the function.

Signed-off-by: Jordan Crouse <***@codeaurora.org>
Signed-off-by: Rob Clark <***@gmail.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/gpu/drm/msm/msm_gem_submit.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/msm/msm_gem_submit.c b/drivers/gpu/drm/msm/msm_gem_submit.c
index b6a0f37a65f3..427898a96325 100644
--- a/drivers/gpu/drm/msm/msm_gem_submit.c
+++ b/drivers/gpu/drm/msm/msm_gem_submit.c
@@ -290,7 +290,7 @@ static int submit_reloc(struct msm_gem_submit *submit, struct msm_gem_object *ob
{
uint32_t i, last_offset = 0;
uint32_t *ptr;
- int ret;
+ int ret = 0;

if (offset % 4) {
DRM_ERROR("non-aligned cmdstream buffer: %u\n", offset);
@@ -317,12 +317,13 @@ static int submit_reloc(struct msm_gem_submit *submit, struct msm_gem_object *ob

ret = copy_from_user(&submit_reloc, userptr, sizeof(submit_reloc));
if (ret)
- return -EFAULT;
+ goto out;

if (submit_reloc.submit_offset % 4) {
DRM_ERROR("non-aligned reloc offset: %u\n",
submit_reloc.submit_offset);
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}

/* offset in dwords: */
@@ -331,12 +332,13 @@ static int submit_reloc(struct msm_gem_submit *submit, struct msm_gem_object *ob
if ((off >= (obj->base.size / 4)) ||
(off < last_offset)) {
DRM_ERROR("invalid offset %u at reloc %u\n", off, i);
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}

ret = submit_bo(submit, submit_reloc.reloc_idx, NULL, &iova, &valid);
if (ret)
- return ret;
+ goto out;

if (valid)
continue;
@@ -353,9 +355,10 @@ static int submit_reloc(struct msm_gem_submit *submit, struct msm_gem_object *ob
last_offset = off;
}

+out:
msm_gem_put_vaddr_locked(&obj->base);

- return 0;
+ return ret;
}

static void submit_cleanup(struct msm_gem_submit *submit)

[Levin, Alexander (Sasha Levin)]

From: Milo Kim <***@gmail.com>

[ Upstream commit 820381572fc015baa4f5744f5d4583ec0c0f1b82 ]

Specify the power button interrupt number which is from the datasheet.

Signed-off-by: Milo Kim <***@gmail.com>
Acked-by: Rob Herring <***@kernel.org>
Signed-off-by: Tony Lindgren <***@atomide.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
index 3e5b9793341f..8682ab6d4a50 100644
--- a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
+++ b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
@@ -8,8 +8,9 @@ This driver provides a simple power button event via an Interrupt.
Required properties:
- compatible: should be "ti,tps65217-pwrbutton" or "ti,tps65218-pwrbutton"

-Required properties for TPS65218:
+Required properties:
- interrupts: should be one of the following
+ - <2>: For controllers compatible with tps65217
- <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218

Examples:
@@ -17,6 +18,7 @@ Examples:
&tps {
tps65217-pwrbutton {
compatible = "ti,tps65217-pwrbutton";
+ interrupts = <2>;
};
};

[Levin, Alexander (Sasha Levin)]

From: Masami Hiramatsu <***@kernel.org>

[ Upstream commit 1f2ed153b916c95a49a1ca9d7107738664224b7f ]

Since 'perf probe' supports cross-arch probes, it is possible to analyze
different arch kernel image which has different bits-per-long.

In that case, it fails to get the module name because it uses the
MOD_NAME_OFFSET macro based on the host machine bits-per-long, instead
of the target arch bits-per-long.

This fixes above issue by changing modname-offset based on the target
archs bit width. This is ok because linux kernel uses LP64 model on
64bit arch.

E.g. without this (on x86_64, and target module is arm32):

$ perf probe -m build-arm/fs/configfs/configfs.ko -D configfs_lookup
p:probe/configfs_lookup :configfs_lookup+0
^-Here is an empty module name.

With this fix, you can see correct module name:

$ perf probe -m build-arm/fs/configfs/configfs.ko -D configfs_lookup
p:probe/configfs_lookup configfs:configfs_lookup+0

Signed-off-by: Masami Hiramatsu <***@kernel.org>
Cc: Jiri Olsa <***@redhat.com>
Cc: Namhyung Kim <***@kernel.org>
Cc: Peter Zijlstra <***@infradead.org>
Link: http://lkml.kernel.org/r/***@devbox
Signed-off-by: Arnaldo Carvalho de Melo <***@redhat.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
tools/perf/util/probe-event.c | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index 1d9c02bc00f1..7f1420521ede 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -268,21 +268,6 @@ static bool kprobe_warn_out_range(const char *symbol, unsigned long address)
}

/*
- * NOTE:
- * '.gnu.linkonce.this_module' section of kernel module elf directly
- * maps to 'struct module' from linux/module.h. This section contains
- * actual module name which will be used by kernel after loading it.
- * But, we cannot use 'struct module' here since linux/module.h is not
- * exposed to user-space. Offset of 'name' has remained same from long
- * time, so hardcoding it here.
- */
-#ifdef __LP64__
-#define MOD_NAME_OFFSET 24
-#else
-#define MOD_NAME_OFFSET 12
-#endif
-
-/*
* @module can be module name of module file path. In case of path,
* inspect elf and find out what is actual module name.
* Caller has to free mod_name after using it.
@@ -296,6 +281,7 @@ static char *find_module_name(const char *module)
Elf_Data *data;
Elf_Scn *sec;
char *mod_name = NULL;
+ int name_offset;

fd = open(module, O_RDONLY);
if (fd < 0)
@@ -317,7 +303,21 @@ static char *find_module_name(const char *module)
if (!data || !data->d_buf)
goto ret_err;

- mod_name = strdup((char *)data->d_buf + MOD_NAME_OFFSET);
+ /*
+ * NOTE:
+ * '.gnu.linkonce.this_module' section of kernel module elf directly
+ * maps to 'struct module' from linux/module.h. This section contains
+ * actual module name which will be used by kernel after loading it.
+ * But, we cannot use 'struct module' here since linux/module.h is not
+ * exposed to user-space. Offset of 'name' has remained same from long
+ * time, so hardcoding it here.
+ */
+ if (ehdr.e_ident[EI_CLASS] == ELFCLASS32)
+ name_offset = 12;
+ else /* expect ELFCLASS64 by default */
+ name_offset = 24;
+
+ mod_name = strdup((char *)data->d_buf + name_offset);

ret_err:
elf_end(elf);

[Levin, Alexander (Sasha Levin)]

From: Guillaume Nault <***@alphalink.fr>

[ Upstream commit 97b84fd6d91766ea57dcc350d78f42639e011c30 ]

An L2TP socket bound to the unspecified address should match with any
address. If not, it can't receive any packet and __l2tp_ip6_bind_lookup()
can't prevent another socket from binding on the same device/tunnel ID.

While there, rename the 'addr' variable to 'sk_laddr' (local addr), to
make following patch clearer.

Signed-off-by: Guillaume Nault <***@alphalink.fr>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Sasha Levin <***@verizon.com>
---
net/l2tp/l2tp_ip6.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c
index b10abef6b0a0..1d522ce833e6 100644
--- a/net/l2tp/l2tp_ip6.c
+++ b/net/l2tp/l2tp_ip6.c
@@ -64,7 +64,7 @@ static struct sock *__l2tp_ip6_bind_lookup(struct net *net,
struct sock *sk;

sk_for_each_bound(sk, &l2tp_ip6_bind_table) {
- const struct in6_addr *addr = inet6_rcv_saddr(sk);
+ const struct in6_addr *sk_laddr = inet6_rcv_saddr(sk);
struct l2tp_ip6_sock *l2tp = l2tp_ip6_sk(sk);

if (l2tp == NULL)
@@ -72,7 +72,7 @@ static struct sock *__l2tp_ip6_bind_lookup(struct net *net,

if ((l2tp->conn_id == tunnel_id) &&
net_eq(sock_net(sk), net) &&
- (!addr || ipv6_addr_equal(addr, laddr)) &&
+ (!sk_laddr || ipv6_addr_any(sk_laddr) || ipv6_addr_equal(sk_laddr, laddr)) &&
(!sk->sk_bound_dev_if || !dif ||
sk->sk_bound_dev_if == dif))
goto found;

[Levin, Alexander (Sasha Levin)]

From: Liu Bo <***@oracle.com>

[ Upstream commit e321f8a801d7b4c40da8005257b05b9c2b51b072 ]

If @block_group is not @used_bg, it'll try to get @used_bg's lock without
droping @block_group 's lock and lockdep has throwed a scary deadlock warning
about it.
Fix it by using down_read_nested.

Signed-off-by: Liu Bo <***@oracle.com>
Reviewed-by: David Sterba <***@suse.com>
Signed-off-by: David Sterba <***@suse.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
fs/btrfs/extent-tree.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index e46e7fbe1b34..14a37ff0b9e3 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -7401,7 +7401,8 @@ btrfs_lock_cluster(struct btrfs_block_group_cache *block_group,

spin_unlock(&cluster->refill_lock);

- down_read(&used_bg->data_rwsem);
+ /* We should only have one-level nested. */
+ down_read_nested(&used_bg->data_rwsem, SINGLE_DEPTH_NESTING);

spin_lock(&cluster->refill_lock);
if (used_bg == cluster->block_group)

[Levin, Alexander (Sasha Levin)]

From: Jordan Crouse <***@codeaurora.org>

[ Upstream commit a6cb3b864b21b7345f824a4faa12b723c8aaf099 ]

For every submission buffer object one of MSM_SUBMIT_BO_WRITE
and MSM_SUBMIT_BO_READ must be set (and nothing else). If we
allowed zero then the buffer object would never get queued to
be unreferenced.

Signed-off-by: Jordan Crouse <***@codeaurora.org>
Signed-off-by: Rob Clark <***@gmail.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/gpu/drm/msm/msm_gem_submit.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/msm_gem_submit.c b/drivers/gpu/drm/msm/msm_gem_submit.c
index 427898a96325..393973016b52 100644
--- a/drivers/gpu/drm/msm/msm_gem_submit.c
+++ b/drivers/gpu/drm/msm/msm_gem_submit.c
@@ -106,7 +106,8 @@ static int submit_lookup_objects(struct msm_gem_submit *submit,
pagefault_disable();
}

- if (submit_bo.flags & ~MSM_SUBMIT_BO_FLAGS) {
+ if ((submit_bo.flags & ~MSM_SUBMIT_BO_FLAGS) ||
+ !(submit_bo.flags & MSM_SUBMIT_BO_FLAGS)) {
DRM_ERROR("invalid flags: %x\n", submit_bo.flags);
ret = -EINVAL;
goto out_unlock;

[Levin, Alexander (Sasha Levin)]

From: Arvind Yadav <***@gmail.com>

[ Upstream commit e19f32da5ded958238eac1bbe001192acef191a2 ]

Here, pci_iomap can fail, handle this case release selected
pci regions and return -ENOMEM.

Signed-off-by: Arvind Yadav <***@gmail.com>
Signed-off-by: Alex Williamson <***@redhat.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/vfio/pci/vfio_pci.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index 031bc08d000d..43559bed7822 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -1173,6 +1173,10 @@ static int vfio_pci_mmap(void *device_data, struct vm_area_struct *vma)
return ret;

vdev->barmap[index] = pci_iomap(pdev, index, 0);
+ if (!vdev->barmap[index]) {
+ pci_release_selected_regions(pdev, 1 << index);
+ return -ENOMEM;
+ }
}

vma->vm_private_data = vdev;

[Levin, Alexander (Sasha Levin)]

From: "Strashko, Grygorii" <***@ti.com>

[ Upstream commit 2f884e6e688a0deb69e6c9552e51aef8b7e3f5f1 ]

The below call chain generates "scheduling while atomic" backtrace and
causes system crash when Keystone 2 IRQ chip driver is used with RT-kernel:

gic_handle_irq()
|-__handle_domain_irq()
|-generic_handle_irq()
|-keystone_irq_handler()
|-regmap_read()
|-regmap_lock_spinlock()
|-rt_spin_lock()

The reason is that Keystone driver dispatches IRQ using chained IRQ handler
and accesses I/O memory through syscon->regmap(mmio) which is implemented
as fast_io regmap and uses regular spinlocks for synchronization, but
spinlocks transformed to rt_mutexes on RT.

Hence, convert Keystone 2 IRQ driver to use generic irq handler instead of
chained IRQ handler. This way it will be compatible with RT kernel where it
will be forced thread IRQ handler while in non-RT kernel it still will be
executed in HW IRQ context.

Cc: Suman Anna <s-***@ti.com>
Signed-off-by: Grygorii Strashko <***@ti.com>
Tested-by: Suman Anna <s-***@ti.com>
Link: https://lkml.kernel.org/r/20161208233310.10329-1-***@ti.com
Signed-off-by: Jason Cooper <***@lakedaemon.net>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/irqchip/irq-keystone.c | 28 +++++++++++++++++++---------
1 file changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/irqchip/irq-keystone.c b/drivers/irqchip/irq-keystone.c
index 54a5e870a8f5..efbcf8435185 100644
--- a/drivers/irqchip/irq-keystone.c
+++ b/drivers/irqchip/irq-keystone.c
@@ -19,9 +19,9 @@
#include <linux/bitops.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/interrupt.h>
#include <linux/irqdomain.h>
#include <linux/irqchip.h>
-#include <linux/irqchip/chained_irq.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/mfd/syscon.h>
@@ -39,6 +39,7 @@ struct keystone_irq_device {
struct irq_domain *irqd;
struct regmap *devctrl_regs;
u32 devctrl_offset;
+ raw_spinlock_t wa_lock;
};

static inline u32 keystone_irq_readl(struct keystone_irq_device *kirq)
@@ -83,17 +84,15 @@ static void keystone_irq_ack(struct irq_data *d)
/* nothing to do here */
}

-static void keystone_irq_handler(struct irq_desc *desc)
+static irqreturn_t keystone_irq_handler(int irq, void *keystone_irq)
{
- unsigned int irq = irq_desc_get_irq(desc);
- struct keystone_irq_device *kirq = irq_desc_get_handler_data(desc);
+ struct keystone_irq_device *kirq = keystone_irq;
+ unsigned long wa_lock_flags;
unsigned long pending;
int src, virq;

dev_dbg(kirq->dev, "start irq %d\n", irq);

- chained_irq_enter(irq_desc_get_chip(desc), desc);
-
pending = keystone_irq_readl(kirq);
keystone_irq_writel(kirq, pending);

@@ -111,13 +110,15 @@ static void keystone_irq_handler(struct irq_desc *desc)
if (!virq)
dev_warn(kirq->dev, "spurious irq detected hwirq %d, virq %d\n",
src, virq);
+ raw_spin_lock_irqsave(&kirq->wa_lock, wa_lock_flags);
generic_handle_irq(virq);
+ raw_spin_unlock_irqrestore(&kirq->wa_lock,
+ wa_lock_flags);
}
}

- chained_irq_exit(irq_desc_get_chip(desc), desc);
-
dev_dbg(kirq->dev, "end irq %d\n", irq);
+ return IRQ_HANDLED;
}

static int keystone_irq_map(struct irq_domain *h, unsigned int virq,
@@ -182,9 +183,16 @@ static int keystone_irq_probe(struct platform_device *pdev)
return -ENODEV;
}

+ raw_spin_lock_init(&kirq->wa_lock);
+
platform_set_drvdata(pdev, kirq);

- irq_set_chained_handler_and_data(kirq->irq, keystone_irq_handler, kirq);
+ ret = request_irq(kirq->irq, keystone_irq_handler,
+ 0, dev_name(dev), kirq);
+ if (ret) {
+ irq_domain_remove(kirq->irqd);
+ return ret;
+ }

/* clear all source bits */
keystone_irq_writel(kirq, ~0x0);
@@ -199,6 +207,8 @@ static int keystone_irq_remove(struct platform_device *pdev)
struct keystone_irq_device *kirq = platform_get_drvdata(pdev);
int hwirq;

+ free_irq(kirq->irq, kirq);
+
for (hwirq = 0; hwirq < KEYSTONE_N_IRQ; hwirq++)
irq_dispose_mapping(irq_find_mapping(kirq->irqd, hwirq));

[Levin, Alexander (Sasha Levin)]

From: Peter Ujfalusi <***@ti.com>

[ Upstream commit 63c3194b82530bd71fd49db84eb7ab656b8d404a ]

The RESET register only have one self clearing bit and it should not be
cached. If it is cached, when we sync the registers back to the chip we
will initiate a software reset as well, which is not desirable.

Signed-off-by: Peter Ujfalusi <***@ti.com>
Reviewed-by: Jarkko Nikula <***@bitmer.com>
Signed-off-by: Mark Brown <***@kernel.org>
Signed-off-by: Sasha Levin <***@verizon.com>
---
sound/soc/codecs/tlv320aic3x.c | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 5a8d96ec058c..fe45a16a5142 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -126,6 +126,16 @@ static const struct reg_default aic3x_reg[] = {
{ 108, 0x00 }, { 109, 0x00 },
};

+static bool aic3x_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case AIC3X_RESET:
+ return true;
+ default:
+ return false;
+ }
+}
+
static const struct regmap_config aic3x_regmap = {
.reg_bits = 8,
.val_bits = 8,
@@ -133,6 +143,9 @@ static const struct regmap_config aic3x_regmap = {
.max_register = DAC_ICC_ADJ,
.reg_defaults = aic3x_reg,
.num_reg_defaults = ARRAY_SIZE(aic3x_reg),
+
+ .volatile_reg = aic3x_volatile_reg,
+
.cache_type = REGCACHE_RBTREE,
};

[Levin, Alexander (Sasha Levin)]

From: Roger Quadros <***@ti.com>

[ Upstream commit 5acd016c88937be3667ba4e6b60f0f74455b5e80 ]

USB2 port can be operated in dual-role mode but till we
have dual-role support in dwc3 driver let's limit this
port to peripheral mode.

If we don't do so it defaults to host mode. USB1 port
is meant for host only operation and we don't want
both ports in host only mode.

Signed-off-by: Roger Quadros <***@ti.com>
Signed-off-by: Tony Lindgren <***@atomide.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
arch/arm/boot/dts/am57xx-idk-common.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 03cec62260e1..db858fff4e18 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -294,7 +294,7 @@
};

&usb2 {
- dr_mode = "otg";
+ dr_mode = "peripheral";
};

&mmc2 {

[Levin, Alexander (Sasha Levin)]

From: Stefan Wahren <***@i2se.com>

[ Upstream commit 88e20c74ee020f9e0c99dfce0dd9aa61c3f0cca0 ]

The ICOLL controller doesn't provide any facility to configure the
wakeup sources. That's the reason why this implementation lacks
the irq_set_wake implementation. But this prevent us from properly
entering power management states like "suspend to idle".

So enable the flags IRQCHIP_SKIP_SET_WAKE and
IRQCHIP_MASK_ON_SUSPEND to let the irqchip core allows and handles
the power management.

Signed-off-by: Stefan Wahren <***@i2se.com>
Reviewed-by: Fabio Estevam <***@nxp.com>
Link: https://lkml.kernel.org/r/1482863397-11400-1-git-send-email-***@i2se.com
Signed-off-by: Jason Cooper <***@lakedaemon.net>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/irqchip/irq-mxs.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index 17304705f2cf..05fa9f7af53c 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -131,12 +131,16 @@ static struct irq_chip mxs_icoll_chip = {
.irq_ack = icoll_ack_irq,
.irq_mask = icoll_mask_irq,
.irq_unmask = icoll_unmask_irq,
+ .flags = IRQCHIP_MASK_ON_SUSPEND |
+ IRQCHIP_SKIP_SET_WAKE,
};

static struct irq_chip asm9260_icoll_chip = {
.irq_ack = icoll_ack_irq,
.irq_mask = asm9260_mask_irq,
.irq_unmask = asm9260_unmask_irq,
+ .flags = IRQCHIP_MASK_ON_SUSPEND |
+ IRQCHIP_SKIP_SET_WAKE,
};

asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)

[Levin, Alexander (Sasha Levin)]

From: Dave Jiang <***@intel.com>

[ Upstream commit 1594c18fd297a8edcc72bc4b161f3f52603ebb92 ]

Adding Skylake Xeon PCI device ids for ioatdma and related bits.

Signed-off-by: Dave Jiang <***@intel.com>
Signed-off-by: Vinod Koul <***@intel.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/dma/ioat/hw.h | 2 ++
drivers/dma/ioat/init.c | 9 ++++++++-
2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/ioat/hw.h b/drivers/dma/ioat/hw.h
index 8e67895bcca3..abcc51b343ce 100644
--- a/drivers/dma/ioat/hw.h
+++ b/drivers/dma/ioat/hw.h
@@ -64,6 +64,8 @@
#define PCI_DEVICE_ID_INTEL_IOAT_BDX8 0x6f2e
#define PCI_DEVICE_ID_INTEL_IOAT_BDX9 0x6f2f

+#define PCI_DEVICE_ID_INTEL_IOAT_SKX 0x2021
+
#define IOAT_VER_1_2 0x12 /* Version 1.2 */
#define IOAT_VER_2_0 0x20 /* Version 2.0 */
#define IOAT_VER_3_0 0x30 /* Version 3.0 */
diff --git a/drivers/dma/ioat/init.c b/drivers/dma/ioat/init.c
index d235fbe2564f..b45b0363f7f6 100644
--- a/drivers/dma/ioat/init.c
+++ b/drivers/dma/ioat/init.c
@@ -106,6 +106,8 @@ static struct pci_device_id ioat_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_BDX8) },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_BDX9) },

+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_SKX) },
+
/* I/OAT v3.3 platforms */
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_BWD0) },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_BWD1) },
@@ -243,10 +245,15 @@ static bool is_bdx_ioat(struct pci_dev *pdev)
}
}

+static inline bool is_skx_ioat(struct pci_dev *pdev)
+{
+ return (pdev->device == PCI_DEVICE_ID_INTEL_IOAT_SKX) ? true : false;
+}
+
static bool is_xeon_cb32(struct pci_dev *pdev)
{
return is_jf_ioat(pdev) || is_snb_ioat(pdev) || is_ivb_ioat(pdev) ||
- is_hsw_ioat(pdev) || is_bdx_ioat(pdev);
+ is_hsw_ioat(pdev) || is_bdx_ioat(pdev) || is_skx_ioat(pdev);
}

bool is_bwd_ioat(struct pci_dev *pdev)

[Levin, Alexander (Sasha Levin)]

From: Krzysztof Kozlowski <***@kernel.org>

[ Upstream commit 3ef01c968fbfb21c2f16281445d30a865ee4412c ]

NF_CT_PROTO_DCCP/SCTP/UDPLITE were switched from tristate to boolean so
defconfig needs to be adjusted to silence warnings:
warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP
warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE

Signed-off-by: Krzysztof Kozlowski <***@kernel.org>
Signed-off-by: Sasha Levin <***@verizon.com>
---
arch/arm/configs/s3c2410_defconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index bc4bfe02e611..60d3fecd7a22 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -86,9 +86,9 @@ CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_DCCP=y
+CONFIG_NF_CT_PROTO_SCTP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m

[Levin, Alexander (Sasha Levin)]

From: Jack Morgenstein <***@dev.mellanox.co.il>

[ Upstream commit 3b01fe7f91c8e4f9afc4fae3c5af72c14958d2d8 ]

mlx4_QP_FLOW_STEERING_DETACH_wrapper first removes the steering
rule (which results in freeing the rule structure), and then
references a field in this struct (the qp number) when releasing the
busy-status on the rule's qp.

Since this memory was freed, it could reallocated and changed.
Therefore, the qp number in the struct may be incorrect,
so that we are releasing the incorrect qp. This leaves the rule's qp
in the busy state (and could possibly release an incorrect qp as well).

Fix this by saving the qp number in a local variable, for use after
removing the steering rule.

Fixes: 2c473ae7e582 ("net/mlx4_core: Disallow releasing VF QPs which have steering rules")
Signed-off-by: Jack Morgenstein <***@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <***@mellanox.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index 32f76bf018c3..f1eb74a61bce 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -4474,6 +4474,7 @@ int mlx4_QP_FLOW_STEERING_DETACH_wrapper(struct mlx4_dev *dev, int slave,
struct res_qp *rqp;
struct res_fs_rule *rrule;
u64 mirr_reg_id;
+ int qpn;

if (dev->caps.steering_mode !=
MLX4_STEERING_MODE_DEVICE_MANAGED)
@@ -4490,10 +4491,11 @@ int mlx4_QP_FLOW_STEERING_DETACH_wrapper(struct mlx4_dev *dev, int slave,
}
mirr_reg_id = rrule->mirr_rule_id;
kfree(rrule->mirr_mbox);
+ qpn = rrule->qpn;

/* Release the rule form busy state before removal */
put_res(dev, slave, vhcr->in_param, RES_FS_RULE);
- err = get_res(dev, slave, rrule->qpn, RES_QP, &rqp);
+ err = get_res(dev, slave, qpn, RES_QP, &rqp);
if (err)
return err;

@@ -4518,7 +4520,7 @@ int mlx4_QP_FLOW_STEERING_DETACH_wrapper(struct mlx4_dev *dev, int slave,
if (!err)
atomic_dec(&rqp->ref_count);
out:
- put_res(dev, slave, rrule->qpn, RES_QP);
+ put_res(dev, slave, qpn, RES_QP);
return err;
}

[Levin, Alexander (Sasha Levin)]

From: Leon Romanovsky <***@mellanox.com>

[ Upstream commit c1d5f8ff80ea84768f5fae1ca9d1abfbb5e6bbaa ]

This patch removes BUG_ON() macro from mlx4_alloc_icm_coherent()
by checking DMA address alignment in advance and performing proper
folding in case of error.

Fixes: 5b0bf5e25efe ("mlx4_core: Support ICM tables in coherent memory")
Reported-by: Ozgur Karatas <***@member.fsf.org>
Signed-off-by: Leon Romanovsky <***@mellanox.com>
Signed-off-by: Tariq Toukan <***@mellanox.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/net/ethernet/mellanox/mlx4/icm.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/icm.c b/drivers/net/ethernet/mellanox/mlx4/icm.c
index 2a9dd460a95f..e1f9e7cebf8f 100644
--- a/drivers/net/ethernet/mellanox/mlx4/icm.c
+++ b/drivers/net/ethernet/mellanox/mlx4/icm.c
@@ -118,8 +118,13 @@ static int mlx4_alloc_icm_coherent(struct device *dev, struct scatterlist *mem,
if (!buf)
return -ENOMEM;

+ if (offset_in_page(buf)) {
+ dma_free_coherent(dev, PAGE_SIZE << order,
+ buf, sg_dma_address(mem));
+ return -ENOMEM;
+ }
+
sg_set_buf(mem, buf, PAGE_SIZE << order);
- BUG_ON(mem->offset);
sg_dma_len(mem) = PAGE_SIZE << order;
return 0;
}

[Levin, Alexander (Sasha Levin)]

From: Pali Rohár <***@gmail.com>

[ Upstream commit 4cf48f1d7520a4d325af58eded4d8090e1b40be7 ]

Trying to initialize eMMC slot as SDIO or SD cause failure in n900 port of
qemu. eMMC itself is not detected and is not working.

Real Nokia N900 harware does not have this problem. As eMMC is really not
SDIO or SD based such change is harmless and will fix support for qemu.

Signed-off-by: Pali Rohár <***@gmail.com>
Acked-by: Pavel Machek <***@ucw.cz>
Signed-off-by: Tony Lindgren <***@atomide.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
arch/arm/boot/dts/omap3-n900.dts | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 87ca50b53002..4d448f145ed1 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -734,6 +734,8 @@
vmmc_aux-supply = <&vsim>;
bus-width = <8>;
non-removable;
+ no-s

[Levin, Alexander (Sasha Levin)]

From: Stafford Horne <***@gmail.com>

[ Upstream commit 086cc1c31a0ec075dac02425367c871bb65bc2c9 ]

(.rodata+0x8a18): undefined reference to `_text'

This is when using 'make alldefconfig'. Adding this _text symbol to mark
the start of the kernel as in other architecture fixes this.

Signed-off-by: Stafford Horne <***@gmail.com>
Acked-by: Jonas Bonn <***@southpole.se>
Signed-off-by: Sasha Levin <***@verizon.com>
---
arch/openrisc/kernel/vmlinux.lds.S | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/openrisc/kernel/vmlinux.lds.S b/arch/openrisc/kernel/vmlinux.lds.S
index d68b9ede8423..c50609aead35 100644
--- a/arch/openrisc/kernel/vmlinux.lds.S
+++ b/arch/openrisc/kernel/vmlinux.lds.S
@@ -38,6 +38,8 @@ SECTIONS
/* Read-only sections, merged into text segment: */
. = LOAD_BASE ;

+ _text = .;
+
/* _s_kernel_ro must be page aligned */
. = ALIGN(PAGE_SIZE);
_s_kernel_ro = .;

[Levin, Alexander (Sasha Levin)]

From: John Hsu <***@nuvoton.com>

[ Upstream commit a1792cda51300e15b03549cccf0b09f3be82e697 ]

The clk_ref_div is not configured in the correct position of the
register. The patch fixes that clk_ref_div, Pre-Scalar, is assigned
the wrong value.

Signed-off-by: John Hsu <***@nuvoton.com>
Signed-off-by: Mark Brown <***@kernel.org>
Signed-off-by: Sasha Levin <***@verizon.com>
---
sound/soc/codecs/nau8825.c | 3 ++-
sound/soc/codecs/nau8825.h | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c
index e643be91d762..f9f2737c4ad2 100644
--- a/sound/soc/codecs/nau8825.c
+++ b/sound/soc/codecs/nau8825.c
@@ -1928,7 +1928,8 @@ static void nau8825_fll_apply(struct nau8825 *nau8825,
NAU8825_FLL_INTEGER_MASK, fll_param->fll_int);
/* FLL pre-scaler */
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL4,
- NAU8825_FLL_REF_DIV_MASK, fll_param->clk_ref_div);
+ NAU8825_FLL_REF_DIV_MASK,
+ fll_param->clk_ref_div << NAU8825_FLL_REF_DIV_SFT);
/* select divided VCO input */
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5,
NAU8825_FLL_CLK_SW_MASK, NAU8825_FLL_CLK_SW_REF);
diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h
index 1c63e2abafa9..574d6f936135 100644
--- a/sound/soc/codecs/nau8825.h
+++ b/sound/soc/codecs/nau8825.h
@@ -129,7 +129,8 @@
#define NAU8825_FLL_CLK_SRC_FS (0x3 << NAU8825_FLL_CLK_SRC_SFT)

/* FLL4 (0x07) */
-#define NAU8825_FLL_REF_DIV_MASK (0x3 << 10)
+#define NAU8825_FLL_REF_DIV_SFT 10
+#define NAU8825_FLL_REF_DIV_MASK (0x3 << NAU8825_FLL_REF_DIV_SFT)

/* FLL5 (0x08) */
#define NAU8825_FLL_PDB_DAC_EN (0x1 << 15)

[Levin, Alexander (Sasha Levin)]

From: Arvind Yadav <***@gmail.com>

[ Upstream commit 4dcd19bfabaee8f9f4bcf203afba09b98ccbaf76 ]

Here, If devm_ioremap will fail. It will return NULL.
Kernel can run into a NULL-pointer dereference.
This error check will avoid NULL pointer dereference.

Signed-off-by: Arvind Yadav <***@gmail.com>
Acked-by: Yoichi Yuasa <***@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <***@samsung.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/video/fbdev/cobalt_lcdfb.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/video/fbdev/cobalt_lcdfb.c b/drivers/video/fbdev/cobalt_lcdfb.c
index 2d3b691f3fc4..038ac6934fe9 100644
--- a/drivers/video/fbdev/cobalt_lcdfb.c
+++ b/drivers/video/fbdev/cobalt_lcdfb.c
@@ -308,6 +308,11 @@ static int cobalt_lcdfb_probe(struct platform_device *dev)
info->screen_size = resource_size(res);
info->screen_base = devm_ioremap(&dev->dev, res->start,
info->screen_size);
+ if (!info->screen_base) {
+ framebuffer_release(info);
+ return -ENOMEM;
+ }
+
info->fbops = &cobalt_lcd_fbops;
info->fix = cobalt_lcdfb_fix;
info->fix.smem_start = res->start;

[Levin, Alexander (Sasha Levin)]

From: Daniel Bristot de Oliveira <***@redhat.com>

[ Upstream commit 074859184d770824f4437dca716bdeb625ae8b1c ]

Currently, the sched:sched_switch tracepoint reports deadline tasks with
priority -1. But when reading the trace via perf script I've got the
following output:

# ./d & # (d is a deadline task, see [1])
# perf record -e sched:sched_switch -a sleep 1
# perf script
...
swapper 0 [000] 2146.962441: sched:sched_switch: swapper/0:0 [120] R ==> d:2593 [4294967295]
d 2593 [000] 2146.972472: sched:sched_switch: d:2593 [4294967295] R ==> g:2590 [4294967295]

The task d reports the wrong priority [4294967295]. This happens because
the "int prio" is stored in an unsigned long long val. Although it is
set as a %lld, as int is shorter than unsigned long long,
trace_seq_printf prints it as a positive number.

The fix is just to cast the val as an int, and print it as a %d,
as in the sched:sched_switch tracepoint's "format".

The output with the fix is:

# ./d &
# perf record -e sched:sched_switch -a sleep 1
# perf script
...
swapper 0 [000] 4306.374037: sched:sched_switch: swapper/0:0 [120] R ==> d:10941 [-1]
d 10941 [000] 4306.383823: sched:sched_switch: d:10941 [-1] R ==> swapper/0:0 [120]

[1] d.c

---
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>
#include <linux/types.h>
#include <linux/sched.h>

struct sched_attr {
__u32 size, sched_policy;
__u64 sched_flags;
__s32 sched_nice;
__u32 sched_priority;
__u64 sched_runtime, sched_deadline, sched_period;
};

int sched_setattr(pid_t pid, const struct sched_attr *attr, unsigned int flags)
{
return syscall(__NR_sched_setattr, pid, attr, flags);
}

int main(void)
{
struct sched_attr attr = {
.size = sizeof(attr),
.sched_policy = SCHED_DEADLINE, /* This creates a 10ms/30ms reservation */
.sched_runtime = 10 * 1000 * 1000,
.sched_period = attr.sched_deadline = 30 * 1000 * 1000,
};

if (sched_setattr(0, &attr, 0) < 0) {
perror("sched_setattr");
return -1;
}

for(;;);
}
---

Committer notes:

Got the program from the provided URL, http://bristot.me/lkml/d.c,
trimmed it and included in the cset log above, so that we have
everything needed to test it in one place.

Signed-off-by: Daniel Bristot de Oliveira <***@redhat.com>
Acked-by: Steven Rostedt <***@goodmis.org>
Tested-by: Arnaldo Carvalho de Melo <***@redhat.com>
Cc: Alexander Shishkin <***@linux.intel.com>
Cc: Daniel Bristot de Oliveira <***@redhat.com>
Cc: Jiri Olsa <***@redhat.com>
Cc: Peter Zijlstra <***@infradead.org>
Link: http://lkml.kernel.org/r/***@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <***@redhat.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
tools/lib/traceevent/plugin_sched_switch.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/lib/traceevent/plugin_sched_switch.c b/tools/lib/traceevent/plugin_sched_switch.c
index f1ce60065258..ec30c2fcbac0 100644
--- a/tools/lib/traceevent/plugin_sched_switch.c
+++ b/tools/lib/traceevent/plugin_sched_switch.c
@@ -111,7 +111,7 @@ static int sched_switch_handler(struct trace_seq *s,
trace_seq_printf(s, "%lld ", val);

if (pevent_get_field_val(s, event, "prev_prio", record, &val, 0) == 0)
- trace_seq_printf(s, "[%lld] ", val);
+ trace_seq_printf(s, "[%d] ", (int) val);

if (pevent_get_field_val(s, event, "prev_state", record, &val, 0) == 0)
write_state(s, val);
@@ -129,7 +129,7 @@ static int sched_switch_handler(struct trace_seq *s,
trace_seq_printf(s, "%lld", val);

if (pevent_get_field_val(s, event, "next_prio", record, &val, 0) == 0)
- trace_seq_printf(s, " [%lld]", val);
+ trace_seq_printf(s, " [%d]", (int) val);

return 0;
}

[Levin, Alexander (Sasha Levin)]

From: Ioan-Adrian Ratiu <***@adirat.com>

[ Upstream commit 13a6c8328e6056932dc680e447d4c5e8ad9add17 ]

Testing EP_FLAG_RUNNING in snd_complete_urb() before running the completion
logic allows us to save a few cpu cycles by returning early, skipping the
pending urb in case the stream was stopped; the stop logic handles the urb
and sets the completion callbacks to NULL.

Signed-off-by: Ioan-Adrian Ratiu <***@adirat.com>
Signed-off-by: Takashi Iwai <***@suse.de>
Signed-off-by: Sasha Levin <***@verizon.com>
---
sound/usb/endpoint.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index c5251aaad844..b8044c6034b3 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -384,6 +384,9 @@ static void snd_complete_urb(struct urb *urb)
if (unlikely(atomic_read(&ep->chip->shutdown)))
goto exit_clear;

+ if (unlikely(!test_bit(EP_FLAG_RUNNING, &ep->flags)))
+ goto exit_clear;
+
if (usb_pipeout(ep->pipe)) {
retire_outbound_urb(ep, ctx);
/* can be stopped during retire callback */

[Levin, Alexander (Sasha Levin)]

From: Moritz Fischer <***@kernel.org>

[ Upstream commit c415f9e8304a1d235ef118d912f374ee2e46c45d ]

The Zynq Ultrascale MP uses version 1.4 of the Cadence IP core
which fixes some silicon bugs that needed software workarounds
in Version 1.0 that was used on Zynq systems.

Signed-off-by: Moritz Fischer <***@kernel.org>
Cc: Michal Simek <***@xilinx.com>
Cc: Sören Brinkmann <***@xilinx.com>
Cc: Rob Herring <robh+***@kernel.org>
Acked-by: Sören Brinkmann <***@xilinx.com>
Signed-off-by: Michal Simek <***@xilinx.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 83791eadff41..54dc28351c8c 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -175,7 +175,7 @@
};

i2c0: ***@ff020000 {
- compatible = "cdns,i2c-r1p10";
+ compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 17 4>;
@@ -185,7 +185,7 @@
};

i2c1: ***@ff030000 {
- compatible = "cdns,i2c-r1p10";
+ compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 18

[Levin, Alexander (Sasha Levin)]

From: David Lechner <***@lechnology.com>

[ Upstream commit 43aef5c2ca90535b3227e97e71604291875444ed ]

This fixes an error message that was probably copied and pasted. The same
message is used for both the in and out endpoints, so it makes it impossible
to know which one actually failed because both cases say "IN".

Make the out endpoint error message say "OUT".

Signed-off-by: David Lechner <***@lechnology.com>
Signed-off-by: Felipe Balbi <***@linux.intel.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/usb/gadget/function/f_hid.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index b0f71957d00b..b6d4b484c51a 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -582,7 +582,7 @@ static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
}
status = usb_ep_enable(hidg->out_ep);
if (status < 0) {
- ERROR(cdev, "Enable IN endpoint FAILED!\n");
+ ERROR(cdev, "Enable OUT endpoint FAILED!\n");
goto fail;
}
hidg->out_ep->driver_data = hidg;

[Levin, Alexander (Sasha Levin)]

From: Jordan Crouse <***@codeaurora.org>

[ Upstream commit 88b333b0ed790f9433ff542b163bf972953b74d3 ]

Currently the value written to CP_RB_WPTR is calculated on the fly as
(rb->next - rb->start). But as the code is designed rb->next is wrapped
before writing the commands so if a series of commands happened to
fit perfectly in the ringbuffer, rb->next would end up being equal to
rb->size / 4 and thus result in an out of bounds address to CP_RB_WPTR.

The easiest way to fix this is to mask WPTR when writing it to the
hardware; it makes the hardware happy and the rest of the ringbuffer
math appears to work and there isn't any point in upsetting anything.

Signed-off-by: Jordan Crouse <***@codeaurora.org>
[squash in is_power_of_2() check]
Signed-off-by: Rob Clark <***@gmail.com>

Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/gpu/drm/msm/adreno/adreno_gpu.c | 9 ++++++++-
drivers/gpu/drm/msm/msm_ringbuffer.c | 3 ++-
2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
index f386f463278d..a904082ed206 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
@@ -210,7 +210,14 @@ void adreno_submit(struct msm_gpu *gpu, struct msm_gem_submit *submit,
void adreno_flush(struct msm_gpu *gpu)
{
struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
- uint32_t wptr = get_wptr(gpu->rb);
+ uint32_t wptr;
+
+ /*
+ * Mask wptr value that we calculate to fit in the HW range. This is
+ * to account for the possibility that the last command fit exactly into
+ * the ringbuffer and rb->next hasn't wrapped to zero yet
+ */
+ wptr = get_wptr(gpu->rb) & ((gpu->rb->size / 4) - 1);

/* ensure writes to ringbuffer have hit system memory: */
mb();
diff --git a/drivers/gpu/drm/msm/msm_ringbuffer.c b/drivers/gpu/drm/msm/msm_ringbuffer.c
index f326cf6a32e6..67b34e069abf 100644
--- a/drivers/gpu/drm/msm/msm_ringbuffer.c
+++ b/drivers/gpu/drm/msm/msm_ringbuffer.c
@@ -23,7 +23,8 @@ struct msm_ringbuffer *msm_ringbuffer_new(struct msm_gpu *gpu, int size)
struct msm_ringbuffer *ring;
int ret;

- size = ALIGN(size, 4); /* size should be dword aligned */
+ if (WARN_ON(!is_power_of_2(size)))
+ return ERR_PTR(-EINVAL);

ring = kzalloc(sizeof(*ring), GFP_KERNEL);
if (!ring) {

[Levin, Alexander (Sasha Levin)]

From: Dave Jiang <***@intel.com>

[ Upstream commit 34a31f0af84158955a9747fb5c6712da5bbb5331 ]

The Skylake ioatdma is technically CBDMA 3.2+ and contains the same hardware
bits with some additional 3.3 features, but it's not really 3.3 where the
driver is concerned.

Signed-off-by: Dave Jiang <***@intel.com>
Signed-off-by: Vinod Koul <***@intel.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/dma/ioat/init.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/dma/ioat/init.c b/drivers/dma/ioat/init.c
index b45b0363f7f6..0dea6d55f0ff 100644
--- a/drivers/dma/ioat/init.c
+++ b/drivers/dma/ioat/init.c
@@ -1357,6 +1357,8 @@ static int ioat_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)

device->version = readb(device->reg_base + IOAT_VER_OFFSET);
if (device->version >= IOAT_VER_3_0) {
+ if (is_skx_ioat(pdev))
+ device->version = IOAT_VER_3_2;
err = ioat3_dma_probe(device, ioat_dca_enabled);

if (device->version >= IOAT_VER_3_3)

[Levin, Alexander (Sasha Levin)]

From: Christophe JAILLET <***@wanadoo.fr>

[ Upstream commit 75bdc7f31a3a6e9a12e218b31a44a1f54a91554c ]

Add some missing 'of_node_put()' in early exit error path.

Signed-off-by: Christophe JAILLET <***@wanadoo.fr>
Signed-off-by: Vinod Koul <***@intel.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
drivers/dma/ti-dma-crossbar.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/dma/ti-dma-crossbar.c b/drivers/dma/ti-dma-crossbar.c
index 3f24aeb48c0e..2403475a37cf 100644
--- a/drivers/dma/ti-dma-crossbar.c
+++ b/drivers/dma/ti-dma-crossbar.c
@@ -149,6 +149,7 @@ static int ti_am335x_xbar_probe(struct platform_device *pdev)
match = of_match_node(ti_am335x_master_match, dma_node);
if (!match) {
dev_err(&pdev->dev, "DMA master is not supported\n");
+ of_node_put(dma_node);
return -EINVAL;
}

@@ -339,6 +340,7 @@ static int ti_dra7_xbar_probe(struct platform_device *pdev)
match = of_match_node(ti_dra7_master_match, dma_node);
if (!match) {
dev_err(&pdev->dev, "DMA master is not supported\n");
+ of_node_put(dma_node);
return -EINVAL;
}

[Levin, Alexander (Sasha Levin)]

From: Milo Kim <***@gmail.com>

[ Upstream commit 81d7358d7038dd1001547950087e5b0641732f3f ]

Add interrupt specifiers for USB and AC charger input. Interrupt numbers
are from the datasheet.
Fix wrong property for compatible string.

Signed-off-by: Milo Kim <***@gmail.com>
Acked-by: Rob Herring <***@kernel.org>
Signed-off-by: Tony Lindgren <***@atomide.com>
Signed-off-by: Sasha Levin <***@verizon.com>
---
.../devicetree/bindings/power/supply/tps65217_charger.txt | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt b/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt
index 98d131acee95..a11072c5a866 100644
--- a/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt
+++ b/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt
@@ -2,11 +2,16 @@ TPS65217 Charger

Required Properties:
-compatible: "ti,tps65217-charger"
+-interrupts: TPS65217 interrupt numbers for the AC and USB charger input change.
+ Should be <0> for the USB charger and <1> for the AC adapter.
+-interrupt-names: Should be "USB" and "AC"

This node is a subnode of the tps65217 PMIC.

Example:

tps65217-charger {
- compatible = "ti,tps65090-charger";
+ compatible = "ti,tps65217-charger";
+ interrupts = <0>, <1>;
+ interrupt-names = "USB", "AC";
};